Jump to content
SAU Community

Recommended Posts

Do you not have one at all, or is it yours is stuffed and not available new?

Well basically, my brakes have failed in mine - check list that has past are - calipers, hoses, lines, air locks, etc. and the booster but ultimately it has come down to an internal leak within the Master due to pedal going to floor and is really soft.

have also spoken to mechanic's as well with the same conclusion being the front piston seal has given way...

I don't think they are available new? But i haven't been given the chance to call round due to work + Funds are not the brightest at the moment either...

I'm just thinking that just about anything from the wreckers will be similar in condition as they are duty bound these days to remove all fluids, due EPA regulations.

I have to go to Dapto on NSW south coast (just past Wollongong) in next few days, so I can look if you like. Weather permitting!

There must be a brake & clutch specialist up your way that could tell you if it's rebuildable. They put stainless sleeves in them and then a kit and they come out like new, but time line is pretty much untested. When there is nothing else, your choice in minimal.

Cheers, D

I'm just thinking that just about anything from the wreckers will be similar in condition as they are duty bound these days to remove all fluids, due EPA regulations.

I have to go to Dapto on NSW south coast (just past Wollongong) in next few days, so I can look if you like. Weather permitting!

There must be a brake & clutch specialist up your way that could tell you if it's rebuildable. They put stainless sleeves in them and then a kit and they come out like new, but time line is pretty much untested. When there is nothing else, your choice in minimal.

Cheers, D

Cheers for the reply bud, i am getting a quote from the mechanics next to my work on how much the brake/clutch specialists a couple of suburbs away would charge to rebuild (fingers crossed) if they can and if so, i am hoping it wont cost an arm and a leg :banana:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must me missing something? 
    • BRUH, one of the biggest mistakes of my life..... and i've had plenty ;[)
    • @Murray_Calavera iam just considering options 🙂 of course it is very expensive so that why i ask here 🙂  @joshuaho96 I looked at that GCG hybrid(i remember looking at it few weeks before) So this is "that" hybrid where i send them my turbo and they upgrade the inside to Garrett stuff and then they send it back. It cost around 1200-1300 USD which is FAR cheaper than the HKS and it is what iam looking for(i just do not have experience like this...to send something off to "upgrade" ) @tylink720 that is like 150 USD turbo no? 😄 I dont think i have the "ease on my mind" with this kind of turbo. I just put over 7000k USD to "LINK" up my engine...dont want to blow it up with cheap turbo 😄     EDIT: https://www.cj-motor.com/gcg-turbo-charger-for-nissan-rb20det-rb25det-high?srsltid=AfmBOooVeOZ6CZ6r1AIv5m-KPaa6BvudIPJTY8LW78khkd-gQlsaCht9 I looked at this and it seems ok? It is that CGC hybrid and it costs around 1250 USD (with back shipping). Do any of you have experience with this hybrid on NEO turbo? I quickly look thru the forum/web and it seems very good.
    • Echo the awesome sentiment 👍 Definitely a car worth saving. Looking forward to seeing updates as well. 
    • Scenic roads, stunning skylines, and Chickos to finish it off! Join SAU NSW as we cruise through the Royal National Park and along Lawrence Hargrave Drive to Figtree! Sunday 26th October 2025 4:30PM Meeting Waterfall Station Parking 5:00PM Cruise Departure Royal National Park > Lawrence Hargrave Dr > Memorial Dr > Sid Parrish Park 6:15PM Arrival at Sid Parrish Park Figtree Meet Location: Waterfall Station Parking Final Destination: Sid Parrish Park RSVP: https://forms.gle/E4s5SiRKQfDdypky8 *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
×
×
  • Create New...