Jump to content
SAU Community

Recommended Posts

the diagnostic mode sequence is used only to reset the error once you have plugged the seat back in. i dont think it will work without an airbag (or trick resistor plugged in). you can buy the trick resistors in many places, for example

http://gt-rr.com/product.html?m=works_bell...ness&id=761

  • 3 weeks later...
Thanks fo rthat. .

and thanks Adam for the call/email.

yeah the diagnostic did stop the airbag light, but it did stop the engine check light

Hey Drew,

I got mine from Adam and it works fine. Plugged it in for both seats. No lights and no codes and it also means the airbag for the stearing wheel is still operational.

Bill

Hey bill,

Yep I got my thingy off Adam yesterday actually ..

Just plugged it in and did the on/off sequence to reset.. No more annoying light! Yay..

Now just tmps and engine check light to get rid of :P

Its funny - before the cobb and custom tune, when changing to the slick tyres at the track i would get TMPS alarm until i changed back to road wheels.

But now i dont see it any more when changing wheels back and forth. Ask the guys to see if they can program it out for you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
    • Sounds good, we will aim to be there! @The Bogan I'll give you a shout if you are heading up to campbelltown for the meet too.
    • Before I get to the test day, just to finish off the android head unit. This is a demo from car start up....the standard/host system takes a few seconds to boot (same as all v37) but Android comes up quickly. In this vid I'm using the delivered launcher but have set the default to Agami since which is easier to navigate when if use primarily 5 apps. You can see the host system still takes over when required eg putting it in reverse, and you can switch between Android and not by holding the back button 3 sec. It is pretty responsive (fast) but you can see I had to press harder than expected a couple of times.  I still have the phone connected to the stock system, and that also seamlessly takes over Android music playing. v37-android-demo.mp4 The bigger reason that I put this in though is so that I can use Ecutek directly on the head unit. That gives me a dash with logging (up to 20MB only), high and low value warnings on any parameter etc etc. I've run a USB cable from the Ecutek OBD dongle to a USB input on the unit, easy. v37-ecutek-demo.mp4   The unit did freeze on the launcher the other day, I think Agami was trying to verify the license when it didn't have a data connection...will monitor and report back if there are any other problems but so far I'm very happy with the upgrade.
    • Nah that is just crappy GPS mapping, I did have a small excursion (cold tyres, damp track, surprise!), will post up that when I get a chance.
×
×
  • Create New...