Jump to content
SAU Community

Recommended Posts

we go every year, and its always good fun

Newera are given press passes , which allow you into the hall before the masses

allows you to go talk to the exhibitors and to look up close at the cars, before everyone else does.

Moving through the hall, there were move delights on show, including the cars ;-)

DSC_0636.jpg

DSC_0640.jpg

This was my favourite stand ….the guys at hks kansai are great

They are even doing some custom work for my r34 which is on their demo car…but because we asked nicely they are going to produce it for me …wahoo!

DSC_0573.jpg

r34 features the nismo z tune front and rear arch trims

DSC_0537.jpg

DSC_0538.jpg

DSC_0540.jpg

Under bonnet

DSC_0547.jpg

DSC_0543.jpg

R35 demo car – expect to see group guys on these shortly

DSC_0550.jpg

DSC_0557.jpg

New r35 water cooler

DSC_0562.jpg

DSC_0563.jpg

New r35 lsd in development

DSC_0567.jpg

DSC_0575.jpg

DSC_0576.jpg

DSC_0580.jpg

New tomei rb28 set up

DSC_0586.jpg

New turbo set up for r32-34 gtr – 300bhp output each

DSC_0581-1.jpg

Gtr muffler will follow in same style , r35 one being developed in conjunction with new era japan and tomei

DSC_0584.jpg

New wheels from bbs

DSC_0592.jpg

DSC_0590.jpg

DSC_0591.jpg

Hasemi grtr demo cars

DSC_0593.jpg

Coolest stagea ever….

Runs an rb26 d jetro

DSC_0596.jpg

DSC_0597.jpg

DSC_0598.jpg

Wicked ae86

DSC_0633.jpg

DSC_0632.jpg

DSC_0630.jpg

DSC_0629.jpg

Link to comment
https://www.sau.com.au/forums/topic/341598-tokyo-as-2010/
Share on other sites

  • 2 months later...

aawesome!

+ 11 ty.

this thred delivers, passed by a few times but i thought id comment. hakosuka stagea makes me spew in my mouth but i luv the nismo xanavi super gt car. hoping to get back to sepang circuit or even fuji in a few years. great range of cars and parts. more pls. btw i heard about the nur RB28 v-cam top secret R34 GTR. nice one, i remember the 1003hp R33 in Maxx Power magazine from the UK. i like rare expensive stuff.

Edited by dirtyRS4
Link to comment
https://www.sau.com.au/forums/topic/341598-tokyo-as-2010/#findComment-5610819
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Yeah well per the video it took 15s for the stock unit to start up....even if I give it a few seconds discount for starting that is at least 12 sec before you get a reverse camera if you are trying to leave a park.  The android unit is way faster, but 2016 for the stock unit is a long time ago in consumer electronics
    • Yea that’s why I said ima test them with multimeter and see the reads.
    • Only at idle. Isn’t a problem when rev it seems.
    • @Haggerty This seems silly to ask, but are you confident in your ability to tune the Haltech?  
    • Next on the to-do list was an oil and filter change. Nothing exciting to add here except the oil filter is in a really stupid place (facing the engine mount/subframe/steering rack). GReddy do a relocation kit which puts it towards the gearbox, I would have preferred towards the front but there's obviously a lot more stuff there. Something I'll have to look at for the next service perhaps. First time using Valvoline oil, although I can't see it being any different to most other brands Nice... The oil filter location... At least the subframe wont rust any time soon I picked up a genuine fuel filter, this is part of the fuel pump assembly inside the fuel tank. Access can be found underneath the rear seat, you'll see this triangular cover Remove the 3x plastic 10mm nuts and lift the cover up, pushing the rubber grommet through The yellow fuel line clips push out in opposite directions, remove these completely. The two moulded fuel lines can now pull upwards to disconnect, along with the wire electrical plug. There's 8x 8mm bolts that secure the black retaining ring. The fuel pump assembly is now ready to lift out. Be mindful of the fuel hose on the side, the hose clamp on mine was catching the hose preventing it from lifting up The fuel pump/filter has an upper and lower section held on by 4 pressure clips. These did take a little bit of force, it sounded like the plastic tabs were going to break but they didn't (don't worry!) The lower section helps mount the fuel pump, there's a circular rubber gasket/grommet/seal thing on the bottom where the sock is. Undo the hose clip on the short fuel hose on the side to disconnect it from the 3 way distribution pipe to be able to lift the upper half away. Don't forget to unplug the fuel pump too! There's a few rubber O rings that will need transferring to the new filter housing, I show these in the video at the bottom of this write up. Reassembly is the reverse Here's a photo of the new filter installed, you'll be able to see where the tabs are more clearing against the yellow OEM plastic Once the assembly is re-installed, I turned the engine over a few times to help build up fuel pressure. I did panic when the car stopped turning over but I could hear the fuel pump making a noise. It eventually started and has been fine since. Found my 'lucky' coin underneath the rear seat too The Youtube video can be seen here: https://www.youtube.com/watch?v=uLJ65pmQt44&t=6s
×
×
  • Create New...