Jump to content
SAU Community

Recommended Posts

  • 2 weeks later...
  • 5 months later...

Tomei 264 Cams 1 Pair $350

OS Gilken triple plate clutch plus flywheel Good condition $700

1 pair Z32 Airflow meters and filters excellent condition $450

Single turbo race pace manafold and gate 48mm turbo smart gate and 4'' single turbo pipe plus oil line T4 Flange $1400

Jun oil pump good condition $500

Standard water pump good condition $50

RB26 Head complete been surfaced, ready to bolt on $1100

Throddle body $300

Oil cooler kit $450

650 Injectors $400

8lt racepace sump new $1850 (with Diff)

V spec Diff $400

v Spec Computer $300

Motec CAS $300

Igniter RB 26 Good Condition $200

GTR R32/ 33 gear box good condition with transfer case $1000gtr box sold

GTR gear box 33 Rebuild $1000 no transfer case

PWR radiator R33 Gtr 40mm core $360

RB 26 Short motor HKS pistons forged rods Prepped crank Standard, Pistons 60 thou over $2000

TE 37 set of four 18x10 Gold anodized GtR offset $2800

BBS 18x 10.5 Set of four Mesh style GTR offset Fitted with four Bridegstone Re 55, 285x18 R Spec 40% tread $2900

New rear adjustable camber arms top $200

Surge Tank and Bosch 044 Motorsport Pump $280

RB 26 Balancer alternator, $350

Rocker covers,timing cover, igniter top cover with HKS power written on top, plus matching intake manafold wrinkle finish, Matching set $600

Selling GTR R33 V Spec Rolling body, White complianced, no motor gear box, no trim $6000

Hey mate was just wondering if you had any rear gtr Hubs that the driive shafts from the diff atttach to?

Have the following items for sale:

R32 GTR rear lsd/diff (pic for reference but is exactly the same)

$150

2 x R32 GTR dashes (1 really good condition with a small lift and one with ok condition with bubble infront of passenger)

$70/$30

Leather shift boot and handbrake

$20 for the Red/Black set

$10 for stock gear shifter

Pair of Recaro seat rails (1 Genuine, 1 not)

$150 for the set (will not separate)

Tomei 264 Cams 1 Pair $350

OS Gilken triple plate clutch plus flywheel Good condition $700

1 pair Z32 Airflow meters and filters excellent condition $450

Single turbo race pace manafold and gate 48mm turbo smart gate and 4'' single turbo pipe plus oil line T4 Flange $1400

Jun oil pump good condition $500

Standard water pump good condition $50

RB26 Head complete been surfaced, ready to bolt on $1100

Throddle body $300

Oil cooler kit $450

650 Injectors $400

8lt racepace sump new $1850 (with Diff)

V spec Diff $400

v Spec Computer $300

Motec CAS $300

Igniter RB 26 Good Condition $200

GTR R32/ 33 gear box good condition with transfer case $1000

GTR gear box 33 Rebuild $1000 no transfer case

PWR radiator R33 Gtr 40mm core $360

RB 26 Short motor HKS pistons forged rods Prepped crank Standard, Pistons 60 thou over $2000

TE 37 set of four 18x10 Gold anodized GtR offset $2800

BBS 18x 10.5 Set of four Mesh style GTR offset Fitted with four Bridegstone Re 55, 285x18 R Spec 40% tread $2900

New rear adjustable camber arms top $200

Surge Tank and Bosch 044 Motorsport Pump $280

RB 26 Balancer alternator, $350

Rocker covers,timing cover, igniter top cover with HKS power written on top, plus matching intake manafold wrinkle finish, Matching set $600

Selling GTR R33 V Spec Rolling body, White complianced, no motor gear box, no trim $6000

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Jack the back of the car up, pull that wheel off, pull that sensor out, and put a bore scope into the hole to inspect the outer casing, see if anything looks damaged before you pull the whole thing apart.
    • Ergh... So I pulled the speed sensor out again and the tip was shiny so I think it's rubbing the bearing. The bearing contains the magnets for the speed sensor so I think when the first sensor broke it damaged the magnet ring on the bearing.  This is just a Google image, but there is a hole going to the bearing. So when the tip broke off the old sensor I'm guessing it fouled the bearing... As the magnet is only protected by a plastic cover it would be easy to damage it. So I guess I'm doing a bearing again.   
    • My thinking is that if the O2 sensor is shot then your entire above described experience is pure placebo.
    • Here is the mess that I made. That filler there was successful in filling dents in that area. But in the middle area. I can feel dents. And I've gone ocer it multiple times with filler. And the filler is no longer there because i accidently sanded it away. I've chased my tail on this job but this is something else lol. So I'm gonna attempt filler one more time and if it doesn't work I'll just high fill primer the door and see where the issues are because guidecoat is of no use atm.
    • Ok, so I think I sort of figured out where I went wrong. So I definitely overthinked it, and I over sanded, which is probably a large part of the problem. to fix it, I ended up tapping some spots that were likely to be high, made them low, filled them in, and I tackled small sections at a time, and it feels a lot better.    I think what confused me as well is you have the bare metal, and some spots darker and some are lighter, and when I run my finger across it, it' would feel like it's a low spot, but I think it's just a transition in different texture from metal to body filler.    When your finger's sliding on the body filler, and crosses over to the bare metal, going back and forth, it feels like it's a low spot. So I kept putting filler there and sanding, but I think it was just a transition in texture, nothing to do with the low or high spot. But the panel's feels a lot better, and I'm just going to end up priming it, and then I'll block it after with guide coat.   Ended up wasting just about all of my filler on this damn door lol  
×
×
  • Create New...