Jump to content
SAU Community

Recommended Posts

Hi all,

Chasing the drum handbrake assembly from either an r32 gtr/gtst; r33 gtst; z32; z33 or r34 gtt

Let me if you have one that you want to sell or know of somewhere selling one for a reasonable price.

Cheers

Jamie

Edited by «Cyph3r»
Link to comment
https://www.sau.com.au/forums/topic/342707-wtb-drum-handbrake-assembly/
Share on other sites

got the complete hub ass. from a gtst 32 $100 pickup 0400 328786

jon.

Hi all,

Chasing the drum handbrake assembly from either an r32 gtr/gtst; r33 gtst; z32; z33 or r34 gtt

Let me if you have one that you want to sell or know of somewhere selling one for a reasonable price.

Cheers

Jamie

  • Like 1
got the complete hub ass. from a gtst 32 $100 pickup 0400 328786

jon.

Hi jon,

Just waiting to hear back about some 33 assemblies and price on them before I decide what to grab.

Btw, where abouts are you located?

Cheers

Jamie

  • 2 months later...


  • Similar Content

  • Latest Posts

    • I can see between the water jacket and cyl 3 there wasn't a hard line of combustion gas. It certainly appears that the issue is coming from there. Yes, checked the tension. All at 100ft lbs where I set them 5 years ago. These blocks can crack but generally when they have been over bored. Mine is only 0.5mm oversize at 89.5mm. They break between cylinders around the 91mm mark. No sign of that with mine. My gut feeling is the head gasket lifted a while back when the studs stretched and i bandaided it by retorquing the studs. It's finally let go.
    • My Nismo 1.5 churps a bit on reverse turns when cold, but besides that feels like a stock diff.
    • Yes, but, I paid cash and I'm pretty sure the receipt was in the bin 10 minutes after I got home Note to self, keep all receipts
    • Bunnings would have just handed you your money back on that one!
    • So, version 4 intake is on its way I was looking at these a while ago but at around $200 or more it was a little pricey for something that might not work, but, I had it in my watch list, but, I got a message saying it was on special, and I had a code thingie to use, it eventually came in at $120 delivered, so BAM, BUY NOW.....LOL I'll need to have a look when it arrives but I feel it will "look" better than what I currently have, as it comes with a PCV fitting, so I will be able to get rid of the alloy pipe that goes to the throttle body with the PCV fitting  Well, that's what the voices in my head are telling me  Oh, and this happened today Yeap, it was a Trojan, and it was cheap, so I headed back to the hardware store and actually spent a little bit more on a heavy duty,  one that was actually recommended by a plumber mate, a Cyclone one with a fibreglass handle that is actually rated for clay The broken shovel will eventually be "modified" into a short handle shovel
×
×
  • Create New...