Jump to content
SAU Community

Recommended Posts

Red one looks like a C10 one, cause of the mounting at the back

and black one is stick on which wasn't how they were.

But yes they are of C210 size and shape, same as C110

Edited by Socrates
Link to comment
https://www.sau.com.au/forums/topic/342773-all-c210-owners/#findComment-5528573
Share on other sites

I have found i have made some mistakes.

The blue is pretty dark, took it as black.

Both of are of C110/210 size and shape.

Badge on left,

no idea what it's from, aftermarket

Right, C110

genuine.

Note rear quarter panel on JDM C210:

post-67860-1288712975_thumb.jpg

My car before new badges:

post-67860-1288713461_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/342773-all-c210-owners/#findComment-5529216
Share on other sites

Also, with C210 onwards Blue = Non turbo, Red = Turbo

Cost me $174 for 2x "Skyline" Badges and 2x blue GT badges from yahoo japan through jesse streeter., nissan wanted $300.

Edited by Socrates
Link to comment
https://www.sau.com.au/forums/topic/342773-all-c210-owners/#findComment-5529724
Share on other sites

Also, with C210 onwards Blue = Non turbo, Red = Turbo

Cost me $174 for 2x "Skyline" Badges and 2x blue GT badges from yahoo japan through jesse streeter., nissan wanted $300.

C210,s never came out with turbos, c211,s did in japan April 1980, those badges fit

on the rear quarter panel.

Link to comment
https://www.sau.com.au/forums/topic/342773-all-c210-owners/#findComment-5535057
Share on other sites

C210,s never came out with turbos, c211,s did in japan April 1980, those badges fit

on the rear quarter panel.

technically yes but when people say C210 they mean the whole model not just series 1

Link to comment
https://www.sau.com.au/forums/topic/342773-all-c210-owners/#findComment-5535571
Share on other sites

technically yes but when people say C210 they mean the whole model not just series 1

Rightly so, did you know there is a c111 model from the c110, it has fuel injection and a 2 litre 6

also it has a rear wiper for a 4 door sedan, and 4 wheel disc drakes,

Also some of the c210/c211 came out with leather interior,

in australia a good friend of mine owed a wrecker had a 4 cylinder c210 sedan yes"" sedan"" not wagon

with leaf springs. it had the 1.8 motor the same as a 180b.

Cheers

Link to comment
https://www.sau.com.au/forums/topic/342773-all-c210-owners/#findComment-5535833
Share on other sites

Rightly so, did you know there is a c111 model from the c110, it has fuel injection and a 2 litre 6

also it has a rear wiper for a 4 door sedan, and 4 wheel disc drakes,

Also some of the c210/c211 came out with leather interior,

in australia a good friend of mine owed a wrecker had a 4 cylinder c210 sedan yes"" sedan"" not wagon

with leaf springs. it had the 1.8 motor the same as a 180b.

Cheers

didn't know about C111 having fuel injection.

did series 1 c210's have fuel injection JDM?

leaf springs on a 1800TI doesn't sound right, unless they had non independent suspension for the lower models.

Link to comment
https://www.sau.com.au/forums/topic/342773-all-c210-owners/#findComment-5536131
Share on other sites

Rightly so, did you know there is a c111 model from the c110, it has fuel injection and a 2 litre 6

also it has a rear wiper for a 4 door sedan, and 4 wheel disc drakes,

Also some of the c210/c211 came out with leather interior,

in australia a good friend of mine owed a wrecker had a 4 cylinder c210 sedan yes"" sedan"" not wagon

with leaf springs. it had the 1.8 motor the same as a 180b.

Cheers

Don't know where you got this information, but the first factory EFI (L-Jetronic by Bosch) was on HGC211 & S30 280Z as far as I am aware.

D

Link to comment
https://www.sau.com.au/forums/topic/342773-all-c210-owners/#findComment-5536291
Share on other sites

Don't know where you got this information, but the first factory EFI (L-Jetronic by Bosch) was on HGC211 & S30 280Z as far as I am aware.

D

The first efi that nissan fitted was used on the cedrics in 1973 and if im right in japan they go back as far as the late 60;s

EKW WRECKERS in Melbourne had a 1974 2 door coupe ''240''C which which is a cedric in Japan it was a mint green and fully fitted,IT HAD THE EFI SYSTEM, K Jetronic.

even had an air purifiyer for the rear passengers when they smoked.

it was offered to me for $1.200.00 I had no money at the time, and my friend bought it in Nowra.NSW.

as you can tell im not as young as you guys, but believe me ive seen strange things in nissan cars, the 70,s was a great time.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/342773-all-c210-owners/#findComment-5536448
Share on other sites

The first efi that nissan fitted was used on the cedrics in 1973 and if im right in japan they go back as far as the late 60;s

EKW WRECKERS in Melbourne had a 1974 2 door coupe ''240''C which which is a cedric in Japan it was a mint green and fully fitted,IT HAD THE EFI SYSTEM, K Jetronic.

even had an air purifiyer for the rear passengers when they smoked.

it was offered to me for $1.200.00 I had no money at the time, and my friend bought it in Nowra.NSW.

as you can tell im not as young as you guys, but believe me ive seen strange things in nissan cars, the 70,s was a great time.

Cheers.

Also i need to add R30;s in kuwait were imported with a carburettor not with Fuel injection, :devil: the c211 and 280zx only had efi.

also the some of r30 had the H165 Solid axle diff in Kuwait, the gtex had the independant diff.

Link to comment
https://www.sau.com.au/forums/topic/342773-all-c210-owners/#findComment-5536515
Share on other sites

didn't know about C111 having fuel injection.

did series 1 c210's have fuel injection JDM?

leaf springs on a 1800TI doesn't sound right, unless they had non independent suspension for the lower models.

yes, and they are not as collectable there,Japan.. the earlier C110 is and very expensive too, the Japanese love them.

the c210 JDM has fuel injection,I own one. the gtex and the gtes, the gtel had a 2 litre carby and is a slug to drive, it has too much

emmission controls.

Very true about the 1800 skyline, it had the wagon system fitted with the solid axle, but remember they were rare and only a few had that set up. Malaysia, and Singapore had some of these cars they used them for Taxis.

as for the efi fittings nissan fitted them in the last of the 180b...bluebird in japan in 1976,

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/342773-all-c210-owners/#findComment-5536528
Share on other sites

Don't know where you got this information, but the first factory EFI (L-Jetronic by Bosch) was on HGC211 & S30 280Z as far as I am aware.

D

Mario has a fairly awesome collection of English/Japanese books and brochures relating specifically to the C210/C211. Not to mention 25+ years behind the wheels of his C210s. I'd trust anything that he posts to be very well researched.

Link to comment
https://www.sau.com.au/forums/topic/342773-all-c210-owners/#findComment-5539785
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...