Jump to content
SAU Community

Recommended Posts

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Am i right in reading that its a L2S license, rollcage/harnesses type event or have i read the regulations wrong? I didnt see a price either.

The attached entry form should be completed in full and forwarded to the Event Secretary with the entry fee of $170.00

The Competitor and both crew members shall be required to hold a current CAMS Clubman Rally Licence or L2S or superior

I don't believe you require either rollcage or harnesses, just if they are installed then they will need to meet CAMS Regs.

Am i right in reading that its a L2S license, rollcage/harnesses type event or have i read the regulations wrong? I didnt see a price either.

My reading is that it is a Stage 1 event, which does not require a rollcage or harnesses, but if you have them, then they have to comply with Schedule J. The point that I was less clear on was whether just the driver needs a L2S licence, or whether the navigator does as well - which would seem daft, as the driver must drive 100% of the time. If the "co-driver" is to drive, they must do a separate entry.

I think.

I am sure "Speedaware" would be happy to answer queries.

I would love to do this, but neither the GTR or the Pulsar would be ready for next week or even December. I am not sure I could prepare either car adequately for January/February either. So maybe next year. Definitely keen on trying this kind of event, though.

Cheers. ;)

Edited by MLCrisis
Is Will driving, or are you sharing the drive ?

Yeah it'll be Will, bugger we'll be in the same class, doesn't look like it matters if you run semis or not..

oh well I'll have to try and make up some time on the straights.

as for the course, if you've ever done any of the little motorkana courses down there, apparently its all them joined up, including that little goat track between the strip and the roads over the back :P

I'll let you know after thursday..

as for the course, if you've ever done any of the little motorkana courses down there, apparently its all them joined up, including that little goat track between the strip and the roads over the back :D

I'll let you know after thursday..

Yeah, I thought the course would be something like that. Should be pretty good fun :P

Lets chuck in extra 35-40 kilos in your car :)

Mate I'm not on no diet, and remember its a GTR so no light weight :) but yeah no point carrying more than you have to, I'll be taking the spare out :D but thats about it..

did you get your turbo sorted after Shannons, that hurts, to have to pull out first thing, after shelling out $600 for the day?? :P

night went well, pretty fast course, over 200kms in a couple of spots ( they were the only times I look down ) hard to see some of the corners in the dark, and a bit slippery on street tyres, but a shit load of fun, a few incidents more left on trailers than came on them and a lot came on them,

thought I was doing alright until I found out the sticky tyred, caged up Evos were 10 seconds quicker than my 2mins 35sec,

I'll post up some videos when I have a chance the edit it tonight maybe..

Yes was a good night , top 4 spots were Evo's . Good to see Bruce listened to our advice n dialled up the big launches , 1 nasty GTR :blush:

Franz 1st

Ross

Simon

Will

Awsome event and keen to run in the next 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Latest Posts

    • Depending on how long the car sat it is very possible for injectors to be stuck open or closed, I'd get them cleaned and flow tested. Other than that, obviously when the loom changes and the car doesn't start any more....the loom is suspect so some tracing / comparing may be required
    • Harness is for a s1 Rb25det, and it is engine and lower harness.  the old harness had broken off plugs and was in very rough condition/exposed wires and splices etc. it is not able to be put back on the car, I could visually inspect to see if they had rewired any pins on the ecu plug. The fuel pump definitly isn’t turning off it’s an external pump and very loud you can hear it. Will look at the other harness tonight, am also going to pull the fuel rail and watch the injectors spray, will update here with what I find. Pretty sure at this point it has to be something to do with injectors because car will fire up on starting fluid and cas is clicking the Injectors. Fuel pressure is steady 43psi 
    • Check the injectors flow evenly, and are actually flowing what you and the ECU think they should be flowing. If it's starting up on starter fluid, you have a fuel issue. Is it possible under cranking your fuel pump is turning off?   The harness you replaced, is that the whole engine harness? Do yourself a test, and drop the old harness on and plug it into the Z32 ECU. It's possible they've wired things different. From memory S1 to S2 is different in RB25 and you may have a wrong loom
    • I haven’t pulled the injectors to watch them spray yet but they are clicking from the cas and all of the spark plugs are wet with fuel. I’ve thought the cylinders were being flooded from the beginning and was hoping fuel pressure would fix it. Tonight I am going to pull the rail and watch the injectors spray. Don’t know how to test/diagnose if the plugs are firing in correct sequence but that should be a timing thing and as far as timing goes my car still has the half moon for the cas can only install it 1 way. And my mechanical timing is 100% correct I posted photos above. Confirmed with the balancer on and off. 
×
×
  • Create New...