Jump to content
SAU Community

Recommended Posts

hey all as stated im looking at selling my pride and joy ive only owned the car for 4 months and the only reason im selling it is i need the cash for a house deposit so there will be (NO SWAPS SO DONT ASK THANKS) the engine was built in japan bout 6 months ago and i just got a compression test done and reading between 154 and 156 between all 6 pistons if u wish to have alook at the car ur more then welcome but no time wasters or tyre kickers please this car has had approx $50000 spent on it and it is very quick its been tuned to run on 1.2 bar atm moment but was tuned in japan to run 1.6 bar pumping out 710hp im asking $37000 ono

contact me on here or email me please [email protected] cheers

GTR SPECS

CYLINDER BLOCK NISSAN STD.

CRANK SHAFT " (FULL BALANCED)

PISTON " (86.0Φ)

CON-ROD "

HEAD GASKET TOMEI METAL (1.2mm)

INTAKE-EX.MANI GASKET "

CAM PULLEY " (ADJUSTABLE)

CAM SHAFT IN. APEX V-MAX (270° 9.15mm)

" EX. " (280° 9.15mm)

VALVE NISSAN STD.

VALVE SPRING " (REV.LIMIT 8300rpm)

TURBINE TRUST T88-34D 15cm

EX.MANI " ALL STAINLESS

WASTEGATE " TYPE-C HIGH FLOW

MUFFLER ORIGINAL TITAN 100Φ   

CLUTH EXEDY METAL TRIPLE(TYPE Drag)

MISSION GEAR OS-GIKEN 1-2-3 CROSS RATIO

FRONT LSD. CUSCO 4-PINION 1WAY

REAR LSD. NISSAN STD. 4-PINION 2WAY

FINAL GEAR RATIO 4.1

ECU APEX POWER-FC D-JETRO

FUEL INJECTOR DENSO 720cc/min LOW RESIST

FUEL PUMP DENSO 280L/min ×3(DIRECT DRIVE)

FUEL DELIVERY PIPE TRUST 11.0Φ

FUEL REGULATOR SARD TYPE-J HIGH FLOW

FUEL CORRECTOR TANK " (5L)

MAX BOOST 1.6 K

MAX HORSE POWER 710HP

post-76225-1288772521_thumb.jpg

post-76225-1288772527_thumb.jpg

post-76225-1288772535_thumb.jpg

post-76225-1288772544_thumb.jpg

post-76225-1288772553_thumb.jpg

post-76225-1288772561_thumb.jpg

post-76225-1288772568_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/342912-for-sale-1-33-gtr-v-spec/
Share on other sites

also i forgot to say that i recently put peronalised plates on witch say (BUS73D) or busted

i did a fuel test a few weeks ago and im not trying to deter any1 it uses 17 litres per 100km on highway not sure in city driving but i put about 40 litres in a week for work and it gets me 100km approx like i said its not to deter any 1 just been upfront bout it all in all its loud when it idles it shakes the car from side to side from been lumpy as will try and post a vid cheers

ok here its is the vid of it the day i bought it hope u guys like

<object width="480" height="385"><param name="movie" value="http://www.youtube.com/watch?v=faaa3fgfzO8?fs=1&hl=en_US"></param><param'>http://www.youtube.com/watch?v=faaa3fgfzO8?fs=1&hl=en_US"></param><param name="allowFullScreen" value="true"></param><param name="allowscriptaccess" value="always"></param><embed src="http://www.youtube.com/watch?v=faaa3fgfzO8?fs=1&hl=en_US" type="application/x-shockwave-flash" allowscriptaccess="always" allowfullscreen="true" width="480" height="385"></embed></object>

cheers mate it is a beast and goes like 1 to it has a t88-34 d turbo on it so boost dont come on till 5000 rpm but once that happans hold onto ur socks boy lol

i know dude... no one is spending cash on these thing.. the ass has really dropped out of them unfortunatley. my mate just sold his.. not as much work as yours.. was extremely neat tidy.. real good package.. for 22k!

i went to croydon motorsport yesterday and spok with jim and he said the turbo that is on my car should be running higher boost than what it is for the work my motor has had done,,,,,its only running 21psi he gunna tune it to 32psi on c16 fuel (approx 550kw atw yeeeeeehawwwwwww)

ok all im off to the mines in western australia next friday i need the car gone please .......make an offer over $30000 and c were we end up cant stress enough i want it gone other wise it will be sitting in the shed gathering dust not getting drivin and need cash for deposit on house.... cheers

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...