Jump to content
SAU Community

Recommended Posts

Item BENQ G2400W

Price: $140

These still retail around $300-350, so good value

http://www.staticice.com.au/cgi-bin/search...400w&spos=3

Location: Vic, given the type of item its probably pick up only. I can drop off possibly as well depending on location

Will ship @ buyers expense. Id expect at least $20 postage cost.

Condition: Screen and surrounds are in virtually perfect condition.

Only issue is the monitor power button (on/off) does not work. However I simply use Windows power saving which shuts it off anyway, so its no major drama.

Review:

http://www.hardwarezone.com.au/reviews/vie...;cid=5&pg=1

PM to discuss

Link to comment
https://www.sau.com.au/forums/topic/343452-benq-g2400w-24-monitor-140/
Share on other sites

You cannot find a 1900x1200 cheaper than $300 anywhere.

140 the price is. Of course it comes with power cable etc.

The monitor is under half the RRP just because the power button doesn't work which for 99% of people it makes no difference.

Condition otherwise is perfect. I keep all my gear clean and working 100%. Anyone that's brought PC parts off me knows this ;)

hey mate.

so the only problem is the on/off button? no scrathches or dead pixels?

this screen should go to sleep when there is no 'input detected' does it still do this?

im in victoria and interested as i wouldnt mind having 2!

no scratches, no dead pixels - as stated, its in perfect condition save for the power button

yes, the screen goes to sleep when removing the input, same as using O/S or application "sleep".

I can deliver to Cronulla for nothing - I'm driving up there for 4 days @ xmas - if you are happy to collect from there then i have no issue bringing it with me.

I'll be catching up with SAU NSW peeps while I'm up there as well.

Half now, half later - would seem fair to me if that's fair with you :bunny:

  • 2 weeks later...
Guest
This topic is now closed to further replies.


  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...