Jump to content
SAU Community

Recommended Posts

hey guys was just driving in my way home and noticed the warning light on my dash was on.

i pulled over and turned the car off then started it agian and let it idle for a few minutes then reversed out and the light went.

anyone have any idea why the light came on?

wasnt running too hot and it didnt feel any different to drive.

help anyone? pleeaassee :P

Link to comment
https://www.sau.com.au/forums/topic/343493-r33-warning-light/
Share on other sites

Why not? I get into a car to service it, put the handbrake down, and the light remains on. I know instantly it has low brake fluid and there is a problem somewhere.

yes, thats fair enough but just remember the average joe blogs may not have this knowledge. having a seperate light would idiot proof the car and stop people from driving around with little to no brake fluid.

yes, thats fair enough but just remember the average joe blogs may not have this knowledge. having a seperate light would idiot proof the car and stop people from driving around with little to no brake fluid.

i laugh at this comment... if you need it to be idiot proof then you should not be driving a car in the first place cause the person is an idiot :(

Dude it was the handbrake lol it hasn't come on anymore. And im not an idiot I was just wondering seeming as though I havnt had the car for long or had to fix anything so I had no idea what was goin on that's why I posted it up. And the ABS levels are fine :blush:

Dude it was the handbrake lol it hasn't come on anymore. And im not an idiot I was just wondering seeming as though I havnt had the car for long or had to fix anything so I had no idea what was goin on that's why I posted it up. And the ABS levels are fine :blush:

nah mate wasnt calling you an idiot its just some peoples knoledge of cars is so low its scarey.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...