Jump to content
SAU Community

Recommended Posts

Lol, not much of a race the person doing mine takes off on holidays tomorrow hahaha

Mines got 2 mufflers aswel, other is in the box.

Still, I got the motor in the car so that has to be a headstart haha

is it actually possible for a 4" straight through muffler to really do any muffling at all? Even if the oval was 1 meter wide on its own it would still do bugger all surely?

People with more knowledge than I have in this area have sorted it out for me so it's quiet and flows like a drainpipe

I don't mind a bit of noise, just want all the flow possible. Time will tell

Having the motor on the stand is a minor detail :whistling:

Lol!

"it never ends"

Btw you know my carbon Kevlar seat, do you want it? I want a different one and want to sell this before buying another so I'm not stuck with two. You know what it's like at mine with parts and space

Not true at all, at top end when you are making that kind of power a whole lot of exhaust is bypassing the exhaust via the wastegate...

3" on 26 with T04z regularly make between 430-470rwkw

Depends if you are external or internal – either way, bigger does no harm at all.

Garrett engineers on their website clearly state that the less restriction after the turbo the better. Sure this needs to be weighed up with physical limitations and noise levels etc. But a greater flowing exhaust can only improve response and top end power. Obviously, whether its even noticeable depends on your power levels but at 400rwkw I think it would be very noticeable.

Just because some cars manage to get 400rwkw through a 3" exhaust doesnt mean they couldnt be a heap better with a larger exhaust.

Min 3.5" IMO

Couldn’t agree more.

I’ve seen cars make 350rwkw with a 3” as well. Swap it over to a 3.5” and boom, another 15-20rwkw and better midrange. Some are users here (some have also posted, which is good)

Just because it makes the power, you can get a 3” to 400rwkw no problems, doesn’t mean that putting something bigger will not provide benefit.

is it actually possible for a 4" straight through muffler to really do any muffling at all? Even if the oval was 1 meter wide on its own it would still do bugger all surely?

Well with 2x 3.5” straight through mufflers (they are massive), I’m around what, 90dB, so it must be possible :whistling:

Mufflers weren’t cheap, but they certainly have some effect.

would there be any power gains for a 170rwkw by changing from 3" to 3.5" cat back but keep the 3" dump/front/cat?

no mufflers btw

Not really no, 3” with little bends and straight through mufflers is plenty for up to 250-300rwkw.

All you get is noise @ that level.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
    • Since winter isn't that harsh anymore in Poland, i will definetely drive it 365 days a year 😉. But if the snow hits i will try it for sure and let U know. Only swap i am planning to do is of course R34 GTR front 😍.
×
×
  • Create New...