Jump to content
SAU Community

Recommended Posts

Rare Nismo LCD Dash Plus Epson EJ1 Driving Emotion System Suit R33

Dash in Plug and Play (has Power and Ground Connect), Has AV Input

Epson EJ1 System has 5 wires which need to be tapped in the ECU wiring harness (Will Work with aftermarket ecu, was using it with a PFC)

Photo are of acutal dash and EJ1 System (comse with all manuals, wiring harness etc)

4730202889_8fd8c26d12.jpg

IMG_5945 by Kaido_14, on Flickr

4730203437_22698687da.jpg

IMG_5950 by Kaido_14, on Flickr

4730203185_345056c05b.jpg

IMG_5947 by Kaido_14, on Flickr

DSC00122.jpg

DSC00116.jpg

DSC00118.jpg

DSC00119.jpg

DSC00121.jpg

EpsonEJ-1DashInformation.jpg

Complete Setup is very rare, and took me many years of searching to find one and was not cheap

$1150

edit: Dash has 90,800km on it now

Edited by Kaido_RR

Who ever buys this i suggest you use a progamable remote, if you lose the original it is useless and you cant buy the remotes, i spent months looking for one and never found one.

free bump. thats awesome does it work with the R34 with some rewiring??

could wire the epson ej1 system in but im 99% sure the dash wouldn't fit as the r33 and 34 are different

  • 9 months later...
  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • Thank you, 100% the intent. New coils were due and the 17" sixers look/feel loads better than the stock wheels. The aero options are so spot on.   Thanks for the warm welcome, all!
    • 98 r34 gtt Been rocking my latest setup and car running like never before. Have put a good 200 miles on it since all the latest changes and additions. everything is dialed in and have been driving it a bunch.   However, all a sudden last weekend as soon as I pushed throttle passed 4k and the engine stumbles, (slow or fast acceleration) hesitates and doesn’t go above 4100 or so, like a misfire. Everything else seems fine. I had a “good” set of coil packs that I removed from car when I first got it when I changed them over to new coils. I swapped out current ones for those, but no change. I also changed the plugs, no change. Seems to rev over 4 when out of gear with no load just fine no “misfire”, but as soon as its in gear with a load of any kind, it “misfires” as soon as rpm drop back below 4 k it runs perfectly, smooth, starts, restarts and drives fine as long as I keep it below 4 k while in gear. All readings look fine, no CEL   Any idea as to what could all a sudden cause an issue when pushing rpms passed 4 k?
    • When you say your cams are 272/262 is that 272in and 262ex?
    • We're arguing semantics. I am saying 45 accel and a 55 deccel ramp are "2 ways". Even a 45 degree ramp and an 89 degree ramp is "2 ways", because it is literally... two ways. The cusco 55/30 ramp is a 2 way. It's two ways. I get it though - in normal nomenclature a "2 way" would be 45/45 or 55/55 or 60/60 i.e the same locking in both directions. And something like 45/65 would be considered "1.5 way". I would then say if we're getting into the nitty gritty then every locking diff is a "2 way" diff and we should not speak in 1.5, or 2 ways but ramp angles instead. Which ofc if one of those ramp angles is 90deg, that side is not doing any locking. :p So Nismo don't obviously sell 3 things. The fact of the matter that they only sell two items really goes to show that there's a 2 way and a "1,5 way" which is really a 1 way. I believe the actual lockup for the 'adjustability' of the GT pro is really just setting preload for when the ramps actually start locking up. It's not changing how much 'wayness' there is. It is (somehow) horribly explained. People just buy whatever diff and go "locks up good bruh" and that's what ends up on socials forever.  
×
×
  • Create New...