Tial ~19psi Wastegate Spring?

[Jap_Muscle]

Hi Guys,

Just checked the tial website to find a new spring for my setup (60mm gate looking for 18-20psi, currently running 13psi) however tial has mentioned that in order to run higher boost levels i have to combine 2 springs together but only 1 from each category.

clearer explanation here

http://www.tialmedia.com/documents/w3_tial_60_sp.pdf

So does that mean i cant get a tial 20psi spring? What are my options?

Edited November 11, 2010 by Jap_Muscle

[R31Nismoid]

Same as turbosmart.

It's simple maths. if they sell a 14 & 7, then you can only have 21 by combination.

essentially you can only have the psi spring base that they sell and you combine.

[Jap_Muscle]

Same as turbosmart.

It's simple maths. if they sell a 14 & 7, then you can only have 21 by combination.

essentially you can only have the psi spring base that they sell and you combine.

i understand that but it seems to say i can only combine a "small" spring with a "large" spring in a combo. Am i able to combine Large with Large?

[STATUS]

i have a customer making up custom gate springs i will pm you his details.

[Jap_Muscle]

i have a customer making up custom gate springs i will pm you his details.

is that reliable? especially at higher boost levels?

[STATUS]

is that reliable? especially at higher boost levels?

he had one made for his, and we are currently just shy of 500rwkw on std engine:) im sure he will tell you about it top guy and super helpful.

otherwise 21 psi isnt to bad a place to be provided it gives the extra ramp it seems to be missing with the 14psi spring.

[XRATED]

i understand that but it seems to say i can only combine a "small" spring with a "large" spring in a combo. Am i able to combine Large with Large?

The small spring fitts inside the large spring.... (paralell)

So no you cant run a large spring with another large spring. (series)

Or go with a single custom spring... Probably a better option.

Cheers

Justin

[Jap_Muscle]

he had one made for his, and we are currently just shy of 500rwkw on std engine:) im sure he will tell you about it top guy and super helpful.

otherwise 21 psi isnt to bad a place to be provided it gives the extra ramp it seems to be missing with the 14psi spring.

I guess thats the way to go. Does he personally make them? ill wait for your reply then =]

The small spring fitts inside the large spring.... (paralell)

So no you cant run a large spring with another large spring. (series)

Or go with a single custom spring... Probably a better option.

Cheers

Justin

Yeh i figured as much. hopefully ill get it sorted.

cheers