Jump to content
SAU Community

Buying A Stagea Soon

rotarytt

By rotarytt,
in Four Door Family & Wagoneers

 Share

Recommended Posts

rotarytt Contributor

rotarytt

Posted
Posted

how long will a stock rb25 last. I have seen many ring lands failure's on cars that don't have many k's.

how's the oil sump and pump compare to a 33 gtst.

whats good results for a compression test and at what point should i not bother.

most k's clocked on a stock engine?

I will be keeping the car standard.

if i need to replace the engine must i use a 4wd rb25.

what are they worth both reconditioned and second hand.

whats the worst fuel consumption i could get driving it hard.

average driving seems to be around 13 litres around town.

I"v searched and read but want things clarified.

Link to comment
https://www.sau.com.au/forums/topic/344032-buying-a-stagea-soon/
Share on other sites
wolverine Grand Master

wolverine

Posted
Posted

1. +300,000km with good tuning and servicing.

2. Fine and same.

3. Even compression in all cylinders perhaps around 160psi but depending on your gauge

4. Huh

5. Reco = how long is a piece of string and $1500ish

6. How long is a piece of string but 15L - 20L/100km

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      boost source Size Garrett gt28 gen2

      By Dose Pipe Sutututu · Posted

      Just throwing around ideas, does it need to be in the compressor cover? Why not the hot side piping?
    • timmy94
      boost source Size Garrett gt28 gen2

      By timmy94 · Posted

      1/8NPT drill size = 8.7mm. Since the hole got messed up by me, it’s probably around 9mm.    So 1/4” NPT would be next step. A drill size of around 11mm would be preferred there which is not way of my M12 (drill 10.5mm and tap M12 threads) 
    • oHBoy.
      2001 R34DE

      By oHBoy. · Posted

      3 Kids are starting to hit that ages. I wanted to get them something special to learn on, put down the screens and have some fun. 4Door 2001 R34DE Black Pearl GV1 Jap Import, AU 2nd owner. Pre Work done. Suspension - Wheels Pedders SportsRyder Coilovers   Wheels TSG Spokey Boi 18'x9.5"+15 Body JASI Aero 4 door Type R Full Kit LED Conversion - Parker, Blinkers, & Reverse Exhaust Hurricane Headers 100 CPI high flow cat 2.5" Piping Cannon muffler Internal Bride low max stradia ii - front seats  Bride RO seat base and Rails (R/H) Cube short shifter LED Conversion - Interior   
    • MBS206
      boost source Size Garrett gt28 gen2

      By MBS206 · Posted

      Why are you so adamant on going M12? Why not follow Brad (GTSBoy) suggestion. You're talking moving from a 1/8" size, to a 1/2" effectively. 4 times bigger. Why skip the commonly available sizes in between? The bigger you go, the more likely you are to strip the threads out at a later date, as guaranteed, someone will put a huge spanner on the M12 and really tighten it up, and you're only in thin wall, so not a lot of threads to engage!
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Yeah thanks. Car is already at tuners and it staying there to resolve "many" issues they do not like. So it is in a good hands. Getting a good tune on that Nistune ECU too so the car would be good. Just needs a little tune up and love.
×
×
  • Create New...