Jump to content
SAU Community

Fs: Nissan R32 Gtr 10k!

Mad Rusty
 Share

Recommended Posts

Mad Rusty Contributor

Mad Rusty

Posted
Posted (edited)

For Sale

Nissan R32 Skyline GTR Twin Turbo Godzilla

Model: 1993

Engine: RB26DETT

Transmission: Manual

Four Wheel Drive

Colour: White

KM: 121,000

Pro's

Just had fresh N1 Turbos Installed with receipts

Just had fresh X-Treme Heavy Duty Cushioned Button Clutch installed with receipts

Full Straight through exhaust 3 inch (Dump pipes, Mine's Front Pipe, 3inch Cat back)

Comes with full spare stock exhaust

Cons:

Some rust around both rear wheel arches from salt used on the roads in japan

Engine Runs but needs rebuild ASAP as engine is starting to blow smoke.

An R32 GTR usually goes for 16-20k and you dont know what youl get...like me, i got this and within the first 6 months the turbos and clutch blew and now the engine requires rebuilding...

This at 10.5k + rebuild with forged internals (labor and parts around 4-5k) = R32 with 280-300awkw with completely fresh engine, turbos and clutch for 15k.

Cant find a better offer, and you can get to build and oversee the project yourself in person.

Very Quick and Agile

Asking $10,500 neg

Located: Mount Gambier SA

PM me or

Call or Text Russell on

0450359208

post-74075-1289894006_thumb.jpg

post-74075-1289894026_thumb.jpg

post-74075-1289894032_thumb.jpg

post-74075-1289894039_thumb.jpg

post-74075-1289894045_thumb.jpg

Edited by Mad Rusty
Link to comment
https://www.sau.com.au/forums/topic/344520-fs-nissan-r32-gtr-10k/
Share on other sites
BoostdR Mentor

BoostdR

Posted
Posted

I think you need to be honest with people Russell.

I find out I was not the only one to make the trip up from Adelaide to look at this car and find the Structural Rust.

You acted like you had never seen it before, which was dishonest.

Tommmo Proficient

Tommmo

Posted
Posted
I think you need to be honest with people Russell.

I find out I was not the only one to make the trip up from Adelaide to look at this car and find the Structural Rust.

You acted like you had never seen it before, which was dishonest.

LONG drive from adelaide.. i'd be spewin!

so where's the structural rust?

how about some pics?

Mad Rusty Contributor

Mad Rusty

Posted
  • Author
Posted (edited)

Dishonest my ass, You seen it and said it would cost thousands. I took it to a panel beater the next monday and he said it was nothing to even worry about and fixed it up for me for $350 and said its good as new and that you lot were trying to screw me telling me the car isnt worth it.

Ill take some photos and put them up

Edited by Mad Rusty
BoostdR Mentor

BoostdR

Posted
Posted
Dishonest my ass, You seen it and said it would cost thousands. I took it to a panel beater the next monday and he said it was nothing to even worry about and fixed it up for me for $350 and said its good as new and that you lot were trying to screw me telling me the car isnt worth it.

Ill take some photos and put them up

I said you were dishonest pretending you had never seen it before. I talked to another forum member who travelled up from Adelaide to see you prior to me who also pointed out the structual rust to you.

I also said it would cost thousands to fix correctly...so the rust doesn't come back and structual integrity is retained. When they rust from the inside out I feel your $350 will be a temp fix only. I hope the repair was with metal rather than bog.... The firewall and A pillar are not places I would want weak in an accident. May look great 'now'.

I for one am thankful to have seen it before it was 'repaired'

  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Kinkstaah
      new 1.5 LSD issues/concerns

      By Kinkstaah · Posted

      What 1.5 way? There's no such thing really as a 1.5 way, just different ways of explaining 2 ways with different ramp rates. HOWEVER. In any driving in a straight line your 1.5 or 2 or 1.7 way should have no clunking at all. With the clutch fully depressed the diff should be silent (unless it's welded but I'm assuming it's not). Something aint right here.
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      Clutch is a spec brand, new clutch system,( PP, flywheel, friction disc, etc. pull type) installed 100 miles ago, with no problems.
    • JC71
      new 1.5 LSD issues/concerns

      By JC71 · Posted

      looking for some help and maybe some insight on others experience with a new LSD. R34 GT ran and drove beautifully, but always alot of grip loss due to the open R200 rear end, so I just installed a new 1.5 LSD way into the stock open R200 for a ER34. Simple. Everything seemed right. I test drove for the first time this weekend. as I started to back out the garage the first time slowly with tires straight it sounded and felt like I had a loose or half disconnected drive shaft...that was clucking around loose and shaking entire vehicle, and making it feel like the trans clutch was spontaneously slipping then grabbing very roughly while just letting out pedal slowly. I backed it out went to pull forward with the same noise, shake and slip grab feeling with hesitation, I turned the tires to back out more and then pulled ahead some same thing but worst because of added wheel resistance (which that I expected) puzzled … pulling it back in checking everything over and finding nothing wrong, I tried it the next day. same thing, couldn’t believe how it shook everything again making a terrible noise and making it feel like the trans clutch was slipping and grabbing, but I got it out of garage into the driveway, got it straight, drove forward and then reveres a few times in a straight line everything shaking , causing what felt like clutch slip and grab every time, sounded like right behind front driver tire and I could feel it in the floor board with my feet,... worst right when beginning to let clutch pedal out to engage slightly, shuttering and sounding terrible along the way…I managed to slowly get down the road, babying it the whole way, once I was rolling (out of 1st) seemed to be better and between shifts, then clutch felt closer to normal…not slip/ grab etc., but back down to any stop, straight road or turning, same thing. Made no difference if all tires were straight or if I was turning. All other gauge read out correct. with in 2 miles as planned I reached the empty parking lot and performed the break in procedure that came with lsd, essentially to drive in a figure 8 a bunch.  Did this, binding chattering, and shaking the car the whole way. I drove it back home seemed somewhat normal once I was in straight line and past 10 mph or so, and I know it will “bind” on corners and cause some tires squeal when turning especially from a stop, but when I begin to move it still causes what feels like the trans clutch to slip and jerk badly as well as shaking the entire car, and sounds terrible, that I didn’t expect. I used the fluid they supplied with LSD kit and did the breaking, planning to change fluid as they suggest after breaking, but wondering will it get smoother or less aggressive with use? maybe a 1.5 is just too aggressive for normal road driving?   I have a LSD that I put in my 71 cuda when I restored it, with amazing smooth , quite yet effective results. Different style LSD but that ones a joy to drive. maybe expecting too much from this R200?
    • Matt Z
      SAU NSW - Archies Flame Grille Meet & Cruise to Kurnell

      By Matt Z · Posted

      Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Ozdavroz
      WTAC 2025

      By Ozdavroz · Posted

      Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
×
×
  • Create New...