Jump to content
SAU Community

Recommended Posts

Hey just wondering cause i never bought custom plates before, could you buy a custom plate and reserve it without fitting it onto a car? Also the cost is it just $200 and you pick up your plates or is it a fee for the plates themselves plus the annual $200? cheers

All i know is replacement plates are $35, not 100% sure but the initial $200 should include the plates , yes they can be held onto without installing on car .

Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5558674
Share on other sites

$200 upfront cost includes plates.

Would you know if i could just go buy a custom plate and have it reserved until i decide to fit them onto a car? or would i need to exchange it for the current plates i got registered? reason asking cause im driving my parents spare car until i get my own but i kinda want to reserve a plate now so ill have it by the time i get my car before it gets taken or something.

Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5558816
Share on other sites

Pretty sure that you need to put your new plates on within a week or so as your plates are attached to your car registration. You will need to surrendder your old plates within a timeframe (2 weeks AFAIK). Also pretty sure that you can't reserve any plates.

Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5558903
Share on other sites

^^^ Correct, you cant buy new custom plates unless you can register the car their going on, so in that case you need a car rego for them to change over to the new ones, you cant just go in and buy plates, unless you register a car for them to go on.. and depends on the plate you want, my old IGTR32I ones were $280 a year, new ones are only $200 a year.. think you pay an extra $80 for an extra number/letter (7 all up instead of 6), but not sure on that..

Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5558930
Share on other sites

I had my custom plates reserved for 1 year before associating them to a car......Cost $200, mind you i was young and stupid back then and i had a large disposable income... these days with wife and kids im lucky to get $5..... :ermm:

Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5558934
Share on other sites

Pretty sure that you need to put your new plates on within a week or so as your plates are attached to your car registration. You will need to surrendder your old plates within a timeframe (2 weeks AFAIK). Also pretty sure that you can't reserve any plates.

You cant reserve them , payment must be made for yearly contract of $200 ,

payment of custom plates must overlap current registration if they go on a car - "pain in the ass"

At the end of the day they dont need to go on a car at all , you can put them on a wheelie bin , you own the contract

Edited by NISSAN GTR
Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5558938
Share on other sites

^^^ Correct, you cant buy new custom plates unless you can register the car their going on, so in that case you need a car rego for them to change over to the new ones, you cant just go in and buy plates, unless you register a car for them to go on.. and depends on the plate you want, my old IGTR32I ones were $280 a year, new ones are only $200 a year.. think you pay an extra $80 for an extra number/letter (7 all up instead of 6), but not sure on that..

6 characters and below is $200, 7 characters is $255.

Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5559111
Share on other sites

Pretty sure that you need to put your new plates on within a week or so as your plates are attached to your car registration. You will need to surrendder your old plates within a timeframe (2 weeks AFAIK). Also pretty sure that you can't reserve any plates.

thats wrong actually.. you cant keep them yourself but you can store them at SAreg as long as you have payed the year infronts money on it.. it doesnt have to be registered to a vehicle

its not restricted to customs either.. been through it not long ago

Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5559524
Share on other sites

I really don't know if I can justify another $200/yr on my baby. I guess I could go one of the non-yearly fee ones ...

Could get like JRMS-34 or JENS-34 but then people might think I'm 34yo :P .. hmm .. JEN-R34 would be win, but that would be yearly fee. Gheys.

Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5560335
Share on other sites

next chance i get ill just pay a few years in advance, then i can regret it like all the money i spend haha

mines good cos it doesnt apply to one car. eg JRM 34 would be a bit strange on a S15.. RIPP3R goes on anything, that if you plan to keep it for a long period ect

Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5560729
Share on other sites

I really don't know if I can justify another $200/yr on my baby. I guess I could go one of the non-yearly fee ones ...

Could get like JRMS-34 or JENS-34 but then people might think I'm 34yo :) .. hmm .. JEN-R34 would be win, but that would be yearly fee. Gheys.

:D what about JENR-34 once off fee

jenr34.png

Link to comment
https://www.sau.com.au/forums/topic/344944-custom-plates/#findComment-5560836
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yeah, but knowledge of one wire's insulation worn through to short on earth implies the possibility of other wires doing the same. I had my power steering die, because the wire that runs to the solenoid valve on the rack runs in the same loom as the power wire for the O2 sensor. And when the O2 sensor/wire did something stupid and burnt part of that loom to death, the only indication was the shit(ter) fuel economy and the heavy steering. It took deep excavation of the looms in the bay to find the problem. Not wear through in that case, but similar shit.
    • Ah, I thought he'd wired it to one of the spare ECU inputs! Too long ago since I read that post, ha ha. I've been arguing with radiators, harmonic balancers, alternators and rust since reading it.
    • Correct. The ECU cannot read oil temp. (Well, I think it probably can in some situations. I did have the thought of potentially repinning the ECU when I was doing oil pressure). I am using this into the MPVI dongle, so that the MPVI dongle can read oil temperature. It is attached to a VDO gauge which is obviously calibrated to whatever curve the sender actually is using. This would be easy if I could setup a table of voltage to temperature like many sensors, but it appears I cannot do this and can only setup the transform rule which appears to be Input (voltage) x Multiplier, and add an offset. This to me means it MUST be linear. So it may be a complete waste of time wiring this into the ECU. The idea was that the MPVI3 has standalone logging. I wanted to use this instead of a laptop with serial cable (for wideband) for long datalogs. Given the wideband also has electric interference, I may never trust this either in a world where the serial wideband and the analog output wideband do not agree. Last time I did a trace I could see the two wideband traces follow each other, but one was a little leaner than the other. I plan on playing with voltage offsets and actually driving the thing to see how close they correlate. If they never correlate... then, well, maybe I'll never use either. Ideally I'd like to have the Analog wideband read ever so slightly leaner than the serial one, because the serial one is 'correct'. Tuning the car to be ever so slightly too-rich would be the aim. Not needing to have a laptop flying around in the footwell connected with cables is... an advantage. About the only one from the forced upgrade to MPVI3.
    • Hopefully not, since he knows the fuses work ha ha ha
    • I don't think he's got it on a gauge and on the ECU. I think he's got it on the gauge and on the HPTuners DAq thingo. Remember, we're talking about oil temp here, not something that the ECU is actually interested in for its own sake.
×
×
  • Create New...