Jump to content
SAU Community

Recommended Posts

Hi all, just have a few parts leftover from a 32 GTR wreck. Whats listed is all i have so please dont ask if i have anything else...

I'm a little negotiable on price.

Located in SA. Not really too keen on posting things. Contact - via PM.

G force sensor - UNBROKEN! - $150

PB130350.jpg

Clutch and brake pedal - $50

PB130355.jpg

Steering colum, igniton barrel and cover - $70

PB130354.jpg

Air con/heater assembly - $80

PB130348.jpg

Clutch booster/master (vac line has broken off at the elbow) - $60

PB130353.jpg

Dash - Has a bulge but otherwise good - $80

PB130346.jpg

PB130347.jpg

The computers - $50 for all of them

PB130352.jpg

Reverse lamps - $20

PB130351.jpg

Hicas solenoid pack - $40

PB130344.jpg

Unbroken fuse cover - $30

PB130343.jpg

Brake Booster - Some paint is flaking off - $50

PB130340.jpg

A pillar moulds - $60 pair

PB130339.jpg

P/S reservior - $20

PB130338.jpg

A/C compressor - $70

PB130337.jpg

Brake master cylinder, lines and ABS unit - Master cylinder appears to have faulty seal, ABS unit looks good - $100

PB130333.jpg

P/s pump - $50

PB130331.jpg

BOV's - $40

PB130330.jpg

Boot seal - No tears or rips - $50

PB130329.jpg

L and R Front knuckles, hubs, uprights, upper control arms, ABS senders, brake lines, drive shafts (One boot is cracked on both shafts) - $200 for it all

PB130328.jpg

LH tail light - scuffing to the left hand side of the mould. Is repairable. Or just replace the outer skin - $50

PB130334.jpg

RH tail light - Scuffing to RH side of the outer skin. RH lens missing small section of plastic - Useful to someone maybe? - $20

PB130335.jpg

PB130336.jpg

Link to comment
https://www.sau.com.au/forums/topic/345171-r32-gtr-parts-left-over-from-wreck/
Share on other sites

Power steering pump be the same as 33gtr?

my Mates is rooted!

If you reckon it will fit I'll take it

pm me some details for pickup bud

thanks

Power steering pump be the same as 33gtr?

my Mates is rooted!

If you reckon it will fit I'll take it

pm me some details for pickup bud

thanks

I'm not GTR expert, but i'm 99% sure the 32 and 33 GTR pumps are the same.

I'll PM you shortly. I'm replying to PM's as SAU will allow me too. Stupid forum only letting you PM once every half hour... grrrrr

Hi, would you sell the left dash vent separately + post to 2763?

Yes, make an offer worth while and i'll post it. PM me

I will take the P/S reservior.

Give me a price to ship to the gold coast

cheers

Probably $15 champ.

Hya mate how are ya?

Just wondering if the clutch pedal is same as r32 gtst? Also price to ship to Perth WA

cjeers

Not exactly sure mate, i'm not much of an R32 guru. I would say it would be the same but i can't be sure.

Im after the reverse lamps and brake booster. PM me if there still available thanks

PMing.

ok pm your paypal details please I will take that ps resiover

F**k paypal. Bank deposit champ.

I'll PM you when this damn forum will let me! What is it with only being able to send 1 PM every half hour??

  • 2 weeks later...

BUMP, stuff needs to go people.

Also, sick of time wasters! If you dont really want an item or dont have the cash, please dont waste time contacting me.

  • 3 weeks later...
  • 5 months later...
  • 3 months later...

Bump. Threw half of the stuff out that was quite useless.

Still have whats in the photos.

Price drops;

Clutch and brake pedal - $35

Clutch master and booster - $40

Unbroken fusebox cover - $20

Brake booster - $35

ABS unit/master cylinder - $80

P/S pump and bracket - $40

L/R Front hubs, knuckles, drive shafts, brake lines and upper control arms - $150

Want it all gone! Cheers.

Hey Kitto, the clutch pedals are different between GTR and gtst. GTR is shorter in the section that meets up with the firewall because of the clutch master booster being recessed into the firewall.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Brooooo Please send ABS control unit schematic Please! R33 gts25t ABS (Its two plug ecu, black and white) wire colors possible? [email protected]
    • Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
×
×
  • Create New...