Jump to content
SAU Community

Recommended Posts

ive tuned my car but this is one thing i cant seem to find an understandable answer too,

injector lag time vs battery voltage, ive noticed with my lights(or electrical drain) on im getting a richer AFR, i know why this is happening but i cant find out how to set the inj vs batt settings for my setup.

im using datalogit with LC1 and XD16 etc.

RB26 running tomei 600cc injectors 18 psi making 293kw N1 turbo's stock motor on 98

any help with settings for inj lag (ms) vs batV

current settings

16v 0.604

14v 0.772

12v 0.944

10v 1.132

8v 1.316

6v 1.396

inj settings 73.0 lag time 0.03

any help much appreciated

cheers

Jez

Link to comment
https://www.sau.com.au/forums/topic/345957-power-fc-tuning-question/
Share on other sites

if battery voltage is the only variable causing it to run richer you can adjust the settings to suit.

your 12v figure is slighty different to the base map for rb26 but the rest are the same, they're for standard injectors tho, no aftermarket injectors are going to have exactly the same numbers as factory.

at what voltage does it run normal and what voltage make it go rich? and how rich?

Normally 13.2v and with highbeam on 13v

changes from 13.8Afr idle to 13.4afr or so and richer with more load.

I tried playing with the 12v setting and ur correct the rest are stock rb26 figures.

ive tuned my car but this is one thing i cant seem to find an understandable answer too,

injector lag time vs battery voltage, ive noticed with my lights(or electrical drain) on im getting a richer AFR, i know why this is happening

Sorry for the hijack, but can you explain why its happening? I thought it was like this; lower voltage -> higher latency -> less petrol through the injector for a given input -> leaner.

your on the right track,

there is a an adjustment for the injector lag time in milliseconds vs battery voltage, so at a higher voltage the injector will open and close faster and needs a lower lag time = less time open

at lower voltage it will open and close slower so it needs more open time,

i just need to know the correct way to set this up so at all different Voltage there is no affect on AFR's , mainly between 12v and 14v

unless you can get exact firgures from an injector test or similar the only way to set it up is with experimenting. altho .2v drop is bugger and 13v is smack bang in the middle of the 12v and 14v settings, so you might find youself having to adjust both of them to get it right.

if you want to rule out any chance of problems later you could adjust it all then pull off the alternator belt and check the afr's with a lower voltage and adjust to make sure you never get a lean out if your voltage drops lower than normal for whatever reason

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Man, I'm kind of amazed that the price of the turbo has not changed in 7 years. Everything else is inflating beyond reason, but not this? Good on Tao / hypergear I guess? Anyways, good luck with the sale!
    • I'm selling my brand new, in the box, never used Hypergear ATR45 - and I had some additions I paid for a few yrs back when I purchased it. Never ended up having the rest of the money to add all the mods at once, so I just ended up slowly selling each part. I originally had it internally gated, with the dump pipe, however I found it was incompatible with what I was going to use it for, so I contacted (I think Ken) from Hypergear, and he and I messaged back and forth & he got me to ship the turbo back, where they modified it & made it externally gated, and gave me the 5 bolt dump pipe attachment for custom welding. (Photos below) This turbo like I said has never touched the inside of an engine bay, it's completely brand new, never used, been sitting in the same box it arrived in, covered in plastic & all. Below are the photos of it: And while the guys at Hypergear were making it in-shop, they sent me some photos of the process: I'm looking at selling this just because I'm in need of the money right now, and don't have plans on modifying the 34 anytime soon - and from reviews & peformance sheets, this turbo had amazing results back when I was researching. The turbo was purchased in 2018 for $1.9k, with the mods I got added on. Looking at the website now, for the same turbo they sell (ATR45SAT), with the current addons it adds up to $1830 for the turbo Current addons included: - Bolted dump adaptor - Ball bearing CHRA - Braided oil feeding line So I'm looking to possibly sell it for around $1800, with shipping included in that 1.8k, It cost me around $120 to ship - so yeah thought I'd throw it out there and see if anyone was interested in purchasing. Cheers!
    • Turn up your speakers https://youtu.be/5_GK5ChNjOs?feature=shared
    • This thing did a 1:20.88 at Winton on the weekend which is f**king rapid.  Well done mate, your driving has really gone up a few notches not much left on the table now! Good luck at WTAC.   https://www.facebook.com/share/r/1MHyZQBqZ2/  
×
×
  • Create New...