Jump to content
SAU Community

Recommended Posts

hi guys, im looking to buy a r33 exhuast sytem, need a split dump then all the way back. but if you have bits and pieces post here as i will most likely be interested

Link to comment
https://www.sau.com.au/forums/topic/346889-r33-exhaust-system/
Share on other sites

Hi

I have veilside titanum cat back came off from gtr33 not a good condition(has little crack at conected with cat )

but you can fix for your car If you interested in it

I will give you bargain price

phone : 0416 080 415

Thank you

Brad

Hey mae have a 3.5 inch exhaust system from my R33. Custom made no brand, Steel with stainless cannon. Nice sound. Sold my skyline which had a split dump then later had a 320rwkw+ setup on it and worked perfect. Am in the process of moving house and have no were to keep it. Located in Bronte Eastern suburbs, sell for $200. Give me a call on 0414 411 771 if you are interested

Boro

Have a R33 exhaust, the straight through with the twin tips is sold but the other one is still for sale.

Pictures: http://www.skylinesaustralia.com/forums/topic/320107-r33-bits-lots-of-other-stuff-as-well/

I got genuine Nismo exhaust. lol turns out the other exhaust I offered you wasn't a kakimoto. It was a HKS HiPower Silent exhaust, $500 bux would have been a steal ;)

ahhh spewin haha, how much u want for the nismo mate? and what are the specs

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
    • Lock me in mate, although I'm not sure if I'll be heading up from Goulburn or down from Sydney, either way, return will be back to Goulburn 
×
×
  • Create New...