Jump to content
SAU Community

Recommended Posts

LOL at your title

i am still waiting for mine to be complied

Basically

Silver and White ones are a bit Cheaper than your favorite main stream colors (Bayside blue / pearl black, etc). then you got the limited colors like MP and Millennium Jade. they fetch pretty high prices in jap land :)

also try to buy a V-Spec or V-Spec 2, it will hold value and they are worth it for the rear diffuser alone where as the standard ones have slightly higher uglier stance than V-spec.

and try for 2000 and up model, the interior is better and re-sale value as well

i would say buy one with simple mods done (Exhaust,Wheels,etc) these are expensive to buy out right and you don't really add value to the car either, so it saves to get one with these done IMO

Im looking for one aswell....buget depends on car and mods...i was so close to owning bakes old car I could smell the paint. Bakes old car sold for low 50's so any thing in that class im keen to look n buy..if right car I have buget of hi 50's

ill be spending low to mid 50s if that helps though it does depend on car. This will get me a good vspec 2.

Or should i spend mid to high 40s on a 99 vspec in bsblue and spend the rest on mods? Is it better to have an earlier

blue car with money to spare or a later white or silver vspec 2?

decisions decisions :P

I'm happy with my 99 vspec bsb...just don't have the heart to mod it :) Not a fan of the MNP especially MNP III chamelion colours which went out of fashion pretty quick. Mill Jade is a Nur colour only.

can't recall all the differences between vspec 1/2 other than CF bonnet and different interior trim.

mid 50's will get you a reasonable vspec 2, and $70k+ for a Nur.

If you're just gonna track and mod it, then may as well get a bog vspec since you're just going to mod all the bits. If you plan to keep it in original condition then vs2 or nur if you can and keep it as is :)

I would rather a blue one but none around in vspec2. The 5 grand ill save buying a 99 or 2000 model will pay for

some rims so it will be looking how i want straight up. Is a vspec 2 really worth 5 grand considering there are only white

ones around?

Hi

I was thinking of putting up for sale my 34 GTR VSPEC. Titanium in colour, I was advised it is one of the rare colours.

Just under 67000 Klm, extra clean example. 99 model

Specs

Rear Factory carbon fibre diffuser and moulded front diffuser

Nismo Single Plate Clutch

Cat back Exhaust, Fujitsubo one of the highest spec Japanese exhaust for performance and sound

Current model Tein Coilovers

Rear Pineapples

Nismo Dash changed shortly after purchase.

Genuine Nissan Rain Shields

GTR Factory floor mats

Slotted Wiper slot Discs, Front and Rear

Ferodo Brake Pads, Front and Rear

Braded Brake lines, Front and Rear

Clifford Alarm systems, meant to be one of the best nearly 3K fitted

HKS ducted OIL cooler, very neat fitting similar to Nismo version

Nismo engine mounts

Well serviced with all fluids changed.

Gates timing belt kit, stronger belt includes bearing, tensioners and seals. Replaced about 2000klm ago

Price $49500 yell out if interested and I will get some photos

Regards Taylor

0408 188 777

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
    • It is the stock air box with the panel filter. Everything else is stock except the exhaust at this point, as I also went back to the cleaned 270cc injectors. I will check the RPM when the IACV is unplugged and report back.
    • As MBS suggested if this is happening when the engine is cold you're going to want to remove the intake air regulator and verify resistance + that the shutter is physically opening and closing. At -20C should be fully open, 20C half open, over 60C fully closed. At 20C should be 70-80 ohms. For AAC valve testing using a Consult cable see if you can raise and lower the idle by commanding more or less AAC duty cycle. Hopefully it's pretty linear as well, shouldn't be like 30% AAC valve is barely idling and 40% is 1500 rpm.
    • Bloody apprentices! 🙄
×
×
  • Create New...