Jump to content
SAU Community

Hsd Coilovers

SKITTLES
 Share

Recommended Posts

SKITTLES Experienced

SKITTLES

Posted
Posted (edited)

http://cgi.ebay.com.au/Nissan-Skyline-R32-GTST-HSD-Coilover-Suspension-Drift-/260705028301?pt=AU_Car_Parts_Accessories&hash=item3cb33b08cd#ht_4989wt_1034

What do you guys think of these? They seem to get pretty good reviews over on the silvia forums...

Will they fit in an R33?

Edited by SKITTLES
Link to comment
https://www.sau.com.au/forums/topic/347590-hsd-coilovers/
Share on other sites
Omurru Veteran

Omurru

Posted
Posted

They get good reviews? Really? :P

Don't bother. BCs are better and cheaper.

Have you actually tried both? What didn't you like about the HSD? I've driven on and had alot of different suspension in my cars over the years and I would have to say the HSD HR's I had in my 32 were the best sub $2000 coilovers ever, much much better than BC's and I've driven a few different cars with BC's as well as a 32. I find the BC's to be a very bouncy ride especially in lighter cars, that’s with the BR's anyway which is what I presume you are speaking about as you said they are cheaper. I haven't had any experience with the comparatively priced ER's though, so they may be better but they are the same price. Those aren't the standard tops though, unless they are an option? They look like factory tops, the standard ones that come with the HSD's is a pillow ball type.

Link to comment
https://www.sau.com.au/forums/topic/347590-hsd-coilovers/#findComment-5592387
Share on other sites
GTS4WD Grand Master

GTS4WD

Posted
Posted

I have had HSD's HR's on my 32 for years now.

Love them!

I had to go down a couple of KG's in spring rating in the rear to stop the arse comming out so easily. But other than that, love them.

No problems, no leaking, nothing.

Only down side is you cannot independently adjust bump and rebound rates. You get what you pay for I suppose.

Link to comment
https://www.sau.com.au/forums/topic/347590-hsd-coilovers/#findComment-5599455
Share on other sites
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • soviet_merlin
      Duncan's V37.......race car?

      By soviet_merlin · Posted

      Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
    • Murray_Calavera
      Jacks that fit under GTR lips that can reach the subframe?

      By Murray_Calavera · Posted

      My dream is also to have a proper hoist, but I don't think it will ever happen. My quickjack is probably as close as I'll ever get, it really is very good though. 
    • Duncan
      Duncan's V37.......race car?

      By Duncan · Posted

      Yeah we keep on in the dailies, it is pretty poor how many animals get hit and the driver leaves without checking....have saved a couple of little ones over the years. Bit of a gruesome job though, pouches generally need to be cut open because they are so tight and often the joey doesn't realise mum is gone so they are still locked onto the teat. I checked the modules in front of the DS wheel where an oil cooler should go.... There is the radar unit - that can go for race use) One of the 2 HX water pumps, the silver cylinder. That needs to be kept but might be able to be relocated But the bad news, the big computer mounted vertically in front of the wheel (blocking any potential air exit) is the electric steering computer. That is required until/unless i do a hydraulic steering conversion, and in CAD based modern car design it is not like I can just pop a big unit like that somewhere else (plus the loom would be too short anywhere else too). So, the passenger side is OK to clear out (just use a smaller washer reservoir, potentially elsewhere), but the DS no beuno
    • Duncan
      Chris' Toyota Mark ii JZX110

      By Duncan · Posted

      Well, all the best with the new camry It was interesting to hear about the UK process, it is generally a lot more streamlined here with a shipping agent looking after all the import side (noting the exact final price can still be a surprise.....) and I've used a few different brokers on the japan (or US) side, and never had any trouble with any of them....luck of the draw I guess. You mentioned you didn't get the auction sheet (understandable since you bought it from a dealer, not auction), but I always try and get hold of that because they are pretty thorough. I've imported 2x R grade vehicles over the years and both were fine, repairs in Japan are pretty thorough compared to here in Oz.
    • Duncan
      Jacks that fit under GTR lips that can reach the subframe?

      By Duncan · Posted

      BTW I measured the jack I have, it is 70mm at the saddle but you only have about 700 until it returns to 150mm high at the cylinder so it is good but no magic bullet.
×
×
  • Create New...