Jump to content
SAU Community

Recommended Posts

Hey Guys,

As the topic says, we've got our 1st bub arriving very soon...and yes the R34 sedan will no doubt be more of a taxi now! (trying not to trade it in for a SUV).

Need some advise from all those parents out there who had manage to fit a baby capsule in the centre back sit of their R34s.

- How many anchorage point do i need? currently has 2 on the speak shelf, do i need one on the floor?

- Which brand of baby capsule fits best or u recommend?

- With the new regulations and all, any other handy tips would also help. :thanks:

Thanks in advance!

:cheers:

Link to comment
https://www.sau.com.au/forums/topic/347979-need-helpbub-on-the-way/
Share on other sites

Hey Guys,

As the topic says, we've got our 1st bub arriving very soon...and yes the R34 sedan will no doubt be more of a taxi now! (trying not to trade it in for a SUV).

Need some advise from all those parents out there who had manage to fit a baby capsule in the centre back sit of their R34s.

- How many anchorage point do i need? currently has 2 on the speak shelf, do i need one on the floor?

- Which brand of baby capsule fits best or u recommend?

- With the new regulations and all, any other handy tips would also help. :thanks:

Thanks in advance!

:cheers:

Hey, You only need the 2 of the speaker, just double check to make sure they are secure and not lose.

I've had my niece and nephew in both my r33 and my r32 gtr without a problem.

Also best to go a big baby shop and they should allow you to test fit the baby seat in the car it make sure it will fit without an issue but im pretty sure all should fit

Yep, just the two on the parcel shelf, and then the standard seat belt goes through the back of the capsule.

As mentioned above, check how the anchor points have been fitted, as they are generally fitted during compliance, and alot of places do a really bodgy job of it.

Best of luck with the new bub :thumbsup:

  • 2 weeks later...

cheers guys thanks for the replies.

we've bought one of those steelcraft travel system with the transferable baby capsule to the pram. Only just fits in the centre back seat with a 1mm to spare but had to move both the back rest on both front sit though. Plus there is actually a centre anchor point in the back.

so all is good i hope... :cheers:

p.s. boostin the car as much as i could before bub gets in (no more boostin then... :( )

Edited by RTHRTY3

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi all. So one of my major issues at the moment is my rear turbo leaking oil on the exhaust (and the general area). I presumed it was the rock hard super old drain hose, which it was not. So now I am in the midst of removing the rear turbo to get access to the banjo bolt that goes into the turbo oil feed. As one of the previous owners accidentally? tore off the OEM oil feed hardline that reaches behind the turbo, they ran braided lines directly to the turbo, presumably PTFE. Now, regardless if the line has rubber or teflon inside, is it just generally a bad idea to do this? I imagine these lines get quite hot being between the engine, turbo core and exhaust manifold. I suppose it's not too far fetched to think the line may even have melted. I'd love to hear your opinions on this as as the replacement OEM hardline piece is 130 per unit. And cutting open the currently mounted line to see inside will mean I just have to get a replacement either way. So far I am hoping maybe the bolt just loosened or (god forbid) they forgot one of the crush washers.
    • If it's a factory 20de manual probably has the 6 bolt flywheel in which case the det clutches won't work as they're 9 bolt.
    • All RB push clutches are interchangeable. AFAIK, the 4cyl ones are not. Different flywheels. The RB small box is not identical to the 4cyl boxes. Just very similar.
    • Hi. I need a new clutch for my gearbox. It is a factory smallbox behind RB20DE NEO. What options do i have? If iam not mistaken the gearbox should be the same as in R32 GTST and Nissan S14/S15? I found some Xtreme Clutch Stage 1 for S14/S14 (i dont know if you know the brand) (UK) OR...is the clutch same as in the bigbox from RB25DET?   Thank you!  
    • Listening to an artist called "the flashbulb". Not bad. Makes some fairly well researched youtube vids in various things.
×
×
  • Create New...