Jump to content
SAU Community

Recommended Posts

I have a car in mind that i want to buy and have gone to test drive it today. I like the car but i realised that parts of the dash have been wrapped in the carbon fibre thing that many people are talking about. Only issue is that there are bubbles in many places and it seems to be coming off. Generally it looks really dirty. Does anyone know how to remove it ?

Link to comment
https://www.sau.com.au/forums/topic/349508-carbon-fibre-wrap/
Share on other sites

a heat gun should work fine, are a blowdryer.

Heat it up a little so the glue underneath melts, then it should peel off, might have to use a plastic spatula or something.

Citrus spray will help get remaining glue off.

Edited by 180_mph

If i just heated it up... it wouldnt just come off perfectly right ? scared that there will be bits of glue stuck :S

If it is the 3M stuff, should come off without leaving any (not much anyway) residue. Heat it with a blow drier and peel it off. I have applied this stuff to some of my car interior, and when not happy with the first application, heated it up and removed ,then re-applied again. Left no residue (glue etc) when I did it.

The citrus spray is just a cleaning product ,can be found in most supermarkets next to the spray and wipe etc.

a heat gun should work fine, are a blowdryer.

Heat it up a little so the glue underneath melts, then it should peel off, might have to use a plastic spatula or something.

Citrus spray will help get remaining glue off.

If it is the 3M stuff, should come off without leaving any (not much anyway) residue. Heat it with a blow drier and peel it off. I have applied this stuff to some of my car interior, and when not happy with the first application, heated it up and removed ,then re-applied again. Left no residue (glue etc) when I did it.

The citrus spray is just a cleaning product ,can be found in most supermarkets next to the spray and wipe etc.

These guys hit the nail on the head,

The issue is, with that type of vinyl, it has a lower adhesion that others due to the pattern and (if its the one im thinking of) the honeycomb effect on the back designed to make application easier.

When the vinyl is stretched to conform to curves and such, it loses a portion of its adhesion, which can cause it to pop up when exposed to high temperatures such as those experienced in a car on a warm day when the windows are up. This is usually counteracted with a small dose of adhesive promoter/primer to add that extra 'stick' around areas where the vinyl has been stretched.

Should come off fine with the above methods :thumbsup:

Chances are the vinyl will have already lost its adhesiveness since the install, so its unlikely youll be able to remove the bubbles, its ok to pop them and push outthe air when you first do the install but over time it loses its adhesion.

Sadly its probably time to re wrap it

  • 7 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • HFM BM57 has a "bad" knee point, IIRC. It's not the same thing as the later R chassis MC.
    • The ATTESSA is functionally identical to R34; there were a bunch of JDM models that continued ATTESSA including Fuga/Q70, Skyline/Q50, Cima etc as an option. All with Auto only and I think mostly for snow regions. AFAIK there were no AWD VR30DDTT sold in Australia - it is on my to do list to check regs for racing a LHD car in Targa/ATR/AASA/CAMS events because if I can get the auto to work it would be interesting to run a 4wd car The Ecuteck TCM tuning is the same model as their ECU tuning, they already have it for R35 and Dose's favourite, BMW. You buy "points" to allow your computer to be tuned, buy either a bluetooth (phone app) or bluetooth+USB+Key (phone and PC) dongle, and pay for a tune that will be locked to your tuner ( ). You can also access the tuning software yourself but 1. it is mega expensive and 2. these computers have a billion parameters that intersect, so how could you ever spend enough time on it to get a decent result.
    • Or, is it a case of what it is like owning an R series Skyline? NFI what the previous owner has done or fiddled with... Ha ha ha After reading through this thread, I went on a bit of a research about the Q50/Q60. Now I'm quite intrigued by them! Is the AWD in them more like a WRX where it's always AWD, or is it more like the ATTESSA in the GTRs? By the sound of this TCU tuning, this sounds like a case of someone has made some real software for it, and you just need the right piece of hardware, and then you license that specific vehicle/TCU. Or is this a case of the software will be really expensive so only a few tuners have it, and you still have to pay a license per vehicle?
    • By popular demand.. it was a coil. Got my hands on 1 new OEM coil, replaced with the one that made the less noise difference when I unplugged it while the car was running and started the car up. No stutter and the engine light was gone. I guess I’ll buy the other 5 they have lol
    • No, code 21 is very straightforward. It can only be the things described in that diagnostic flow. In fact it has no way of knowing that the spark plug resistance is out of spec.
×
×
  • Create New...