Jump to content
SAU Community

Recommended Posts

looking at importing in the near future, not sure which model to go after though, my only necessity is that it be a series 2 and auto.

i'm in perth and have been told that iron chef imports are a good choice, i would prefer to go through a WA importer, but dont know of any here,

is it much of a hassle going through an interstate importer? and i'm looking to spend up to 14k

Link to comment
https://www.sau.com.au/forums/topic/350130-s2-auto/
Share on other sites

looking at importing in the near future, not sure which model to go after though, my only necessity is that it be a series 2 and auto.

i'm in perth and have been told that iron chef imports are a good choice, i would prefer to go through a WA importer, but dont know of any here,

is it much of a hassle going through an interstate importer? and i'm looking to spend up to 14k

Why import one? There are plenty of these in Australia already and you'll have more guarantees if you buy one off someone on here. Most people go for an import when they're after something more unique or if they want to save money. On a s2 I doubt you'd save much since there are so many around and the local prices are pretty low already. The only part you save on when importing is the actual price of the car in japan. To give you an example, a car that costs $17000 to import may only cost $5000 in japan, so even if you get a cheap one in japan you may only save yourself $1000 or so maximum, not really worth it if you ask me - compared to seeing, inspecting, and test-driving one over here. It made sense to import them when there wasn't many here and you may still get a good deal on a newish M35 if you import one...but 14k will easily get you a good series 2 auto.

to answer the other point, iron chef imports are good, very honest/reliable from what I've heard.

But yeah, have a good look around on carsales and on the for sale thread in this forum - I think you'll find what you need already in Australia.

Link to comment
https://www.sau.com.au/forums/topic/350130-s2-auto/#findComment-5623095
Share on other sites

+1 to buying locally

My s2 C34 cost me 14k and it came with coilovers, fmic, full exhaust, hiflowed turbo and a Haltech.. bargain!

P.S. the WA subsection of the forums has info on importers and workshops in the Consolidated Workshops thread.

Edited by bubba
Link to comment
https://www.sau.com.au/forums/topic/350130-s2-auto/#findComment-5623153
Share on other sites

Recommend iron chef imports. I wouldn't worry about then not being local to you. They are local to me but when I imported my s2 c34 it wouldn't have made a difference if local or not as it is all done over the phone and emails.

Local prices are low but you might still find something a bit special importing too.

Link to comment
https://www.sau.com.au/forums/topic/350130-s2-auto/#findComment-5623946
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So for the wide band is a Bosch 4.9 correct for the Link G4+ along with a Can bus? Just get the Link gear or is generic ok too? Eg here: LINK LINK DIGITAL WIDEBAND CAN MODULE WITH BOSCH 4.9 SENSOR : KYP Performance House  
    • Bit difficult to follow. Have a look below and see what the standard R32 layout was like. Note there was a restrictor in place immediately before "turbocharged pressure control solenoid" that, if removed, magically got you 1 bar boost.
    • I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
×
×
  • Create New...