Jump to content
SAU Community

Recommended Posts

Cleaning out my garage and have got the following bits and pieces looking to sell.

I'm posting them up for sale on eBay later this evening as well but if you're not into the eBay thing then I'll accept the sale of an item through this for sale thread.

R34 NEO Turbocharger unit in usable, good condition with minimal shaft play. Perfect for high-flowing! Removed from a 84,000km odometer vehicle, to the best of my knowledge it's only run standard boost. Also comes with an assortment of turbo gaskets as well. Perfect upgrade for R32 or R33 on its own, suitable direct replacement unit for an R34 obviously and C34 Stagea's.

post-79267-0-53100000-1295077438_thumb.jpg

Exedy Sports Tuff performance heavy duty clutch kit part no. NSK-7333HD, sold brand new as I never got around to fitting this clutch up when I had the car. Comes with everything needed to replace the clutch in an R34 GTT or C34 Series 2 Stagea including: Genuine Nissan spigot and thrust bearing, oil and gearbox seals + clutch alignment tool.

post-79267-0-43343500-1295077463_thumb.jpg

Xforce Varex 2.5 Inch Stainless twin-tip exhaust muffler with variable valve control (best invention ever) The muffler has seen roughly 8000km use and was only removed as the buyer of the car wanted the original Nismo muffler back on the car. Everything needed is included for a simple installation.

post-79267-0-37069700-1295077483_thumb.jpg

Pioneer DEH-P8100BT 2009 head unit with MP3/WMA, bluetooth, dual USB, iPod control. Original wiring harness and steering wheel remote included with the sale.

post-79267-0-18760100-1295077503_thumb.jpg

Items located in Albury/Wodonga area (300km+ from Melbourne, 500km+ Sydney)

Freight handled by Australia Post, everything sent via Registered mail with tracking. Insurance can be added for additional cost.

Please PM me here on SAU for all enquiries, I'm happy to answer any questions you have so feel free to contact me.

NO TIME WASTERS PLEASE.

Thanks everyone!

Link to comment
https://www.sau.com.au/forums/topic/350449-cleaning-out-the-garage/
Share on other sites

Hey How many kw's can the Exedy clutch handle??

Hi Zaver, I'm not 100% certain on the power rating for this clutch as I only intended to replace my old heavy duty unit with this one without taking additional power output into consideration, I'm sure the heavy duty can handle a street-able amount of power, if it were my guess i'd probably say 250-270rwkw to have a reliable clutch life but again I can't say for sure.

You might have better luck asking around the forum for the answer since I never really looked into it.

Thanks.

How much are u looking at selling it for?

I'm open to offers Zaver, you'd be looking at a bit over $800 for the lot if you were buying it elsewhere individually. Give me an idea of what you're happy to pay for the lot and I'll think it over.

If the offer is reasonable then I can remove it from eBay and sell it to you privately.

Ok, well upon reading the rules I can't understand where and what i've done wrong in my listing besides:

1) not mentioning a price on the items which I clearly stated I have no idea what the value of the items are worth, if thats a major problem then I'll just throw some figures out there.

R34 Turbo: $400 + $25 freight

Clutch Kit: $600 + $25 freight

Varex Muffler: $300 + $25 freight

Pioneer Head Unit: $250 + $20 freight

I'm open to offers for what I've listed as stated before, I don't know what any of what I've mentioned is worth so genuine, reasonable offers are considered.

2) I don't carry a personal mobile phone, I only carry a work issued and work-only contact phone so I'm not prepared to give this number out for chit-chat about what I'm selling, if in doubt then look elsewhere simple as that, but all enquiries are answered to with tangible, actual correspondence rather than hear-say over the phone.

3) I'm aware this isn't eBay by all means, but I only opened this thread for the information of SAU's members without any further gain, if this is such a problem then cheerfully lock, delete this thread whatever SAU's moderators feel is necessary. I've got the right to advertise what I'm selling through eBay but obviously SAU takes offence to this kind of trading to protect its own interests. I've traded for years on eBay without a single complaint and if thats not good enough then don't bother enquiring. This thread was opened purely with the intent to give SAU members (who would obviously be the only parties interested in what I'm selling anyway) an opportunity to acquire what I'm selling. I said before, if the offer is reasonable then I will remove the listing from eBay and accept the offer via SAU. This gives SAU members the priority in terms of what is advertised and not eBay.

But otherwise, thanks to those who genuinely show interest in what i've advertised.

Actually mate, I'm quite aware of what I'm selling but you obviously don't understand the concept of item worth. If I didn't know what I was selling I'd be listing the lot as miscellaneous and cheap arses would try flogging it off for ridiculous low-ball offers.

So if your done with being high-horse admin for the day and don't have any further enquiry with what I'm selling then I'm done discussing the issue with you further. And if you're that offended by my for sale thread then by all means delete the entire thing.

you obviously don't understand the concept of item worth.

Actually given you couldn't provide pricing - I'd say that it was you who didn't understand the concept.

Follow the rules next time or your threads will be locked.

Ash you seem to keep coming back for more and every time you're making yourself look more an idiot so unless your interested in what I've got for sale, next time I have to read a post from you on my for sale thread thats got nothing to do with an enquiry I'll be making a complaint with the relevant people of SAU and thats final.

Right now your borderline harassing me about trivial nothing and I had no problem with altering the listing to conform with the rules being it my first sale post, but your attitude about the entire thing so far has been nothing short disgusting and reeks of poor management and it must make for one unique character that I'm thankful I haven't got to deal with on a personal basis.

And don't worry I wont bother advertising anything on SAU after this because I don't appreciate the persecution on a public forum over something as ridiculous as this.

So I trust we're done on the matter, if theres anything left needing attending to then I'm happy to comply otherwise this back and forth dispute isn't doing any justice for the admins reputation of this forum.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...