Jump to content
SAU Community

Recommended Posts

hi all, i have an r33 rb25det with exhaust, bigger intercooler, blitz boost controller, splitfire coilpacks, and adding a safc within the next 2 days or so to try to stop it from running to rich.

does anybody no the air fuel ratio for a 25 running 10 psi?

Link to comment
https://www.sau.com.au/forums/topic/350560-r33-safc-tunes/
Share on other sites

as for what it is currently running now i'd say probably around 10.5:1 at high rpm. tuned you want it around 12:1, however when tuning with a safc you also end up altering the timing so you may not get it that lean. you might only get it to about 11.5:1 before it starts to ping. either way, a tuner should be able to sort it out for you since they will have a wideband o2 sensor to measure it (don't try and tune it yourself without one).

Link to comment
https://www.sau.com.au/forums/topic/350560-r33-safc-tunes/#findComment-5628644
Share on other sites

hence why you also use the apexi sitc, to be in control of the timing change(s)

safc + sitc with z32 afm = good combo

ran this myself, however changed out for AEM f/ic-8 (like greddy emanage ultimate) when upgraded to GT30 turbo

Link to comment
https://www.sau.com.au/forums/topic/350560-r33-safc-tunes/#findComment-5628957
Share on other sites

i wasnt aware the safc altered timing. How does it do that?

you are altering the AFM signal. generally the AFM voltage is used as the load scale and the RPM as the other scale. if you alter the AFM voltage you then alter the load scale and since the timing varies depending on the load, you end up altering the timing. most people don't realise this so if they do it themselves they may get the AFR's right but have the car pinging because they weren't paying attention to it.

Link to comment
https://www.sau.com.au/forums/topic/350560-r33-safc-tunes/#findComment-5629805
Share on other sites

  • 3 weeks later...

ah yes. that makes some sense.

Gotcha. good description.

you are altering the AFM signal. generally the AFM voltage is used as the load scale and the RPM as the other scale. if you alter the AFM voltage you then alter the load scale and since the timing varies depending on the load, you end up altering the timing. most people don't realise this so if they do it themselves they may get the AFR's right but have the car pinging because they weren't paying attention to it.

Link to comment
https://www.sau.com.au/forums/topic/350560-r33-safc-tunes/#findComment-5654543
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The issue now is the 'fuel cut' while driving, and when it happend, it does not stall. This, I did not test the fuel pressure while driving as I cannot with a fuel pressure gauge. I do have Nistune logs, yes. I have also replaced the MAF Sensor.   Also related to the FPG Fuel Hanger – I just realized that I need a Deutsch Crimp Tool to crimp some cables for the FPG Fuel Hanger. Need to purchase additional cables as the kit only included 2, which are for the float. FPG is has not responded to my emails so far after purchasing. I thought about taking it to someone and having it done professionally, but I am reluctant since everyone I took it to messed up in some way.  
    • There's a good German place in Brisbane if youre up for the drive 😛
    • The German place in Cabramatta was rock solid, fresh pretzel cooked to order back then. Then it went all quiet, after all the poker machines were removed, then I believe it closed for good. I did drive past the other week and noticed outdoor lighting a big screen, but no idea what is there now.  
    • Yeah I suspect even if you hold airmass per cycle/cylinder constant if you get too far away from stock you're still going to have problems running the factory tune within the bounds of the factory load scale. Cams, different displacement/rod ratio, etc. I'm just lucky that the GTIII-SS with wastegate boost + CA compliance cats is pretty much equivalent to stock turbos. When I have actual space I can finally get it tuned and modify the fuel system for flex fuel to 100% handle any detonation concerns when cranking the boost to whatever those dinky turbos can put out.
    • I would say no, why, because my daughter, who also lives in Goulburn, hasn't recommended us going there Pity, as we miss all the German joints around in Sydney, actually, the restaurants are the only thing I really miss about Sydney, and a special mention to Ishibanboshi at Bondi Junction, their Kara-age Don is heart cloggingly deliciousness (always added a special boiled egg...or 2) 😋 
×
×
  • Create New...