Jump to content
SAU Community

Recommended Posts

R33 skyline

138***km

5sp manual rb25det, turbo

Nismo suspension (damper adjustable)

excedy heady duty clutch (less than 6 months old)

super spark coilpacks

slotted brake rotors (near new)

carbon fibre dash cluster

turbo back jap stainless exhaust, nice note not a loud system

m spec model

full m spec body kit

airbags

nismo rear spoiler

few other m spec extras

tyres are relatively new, would say about 80% its been very well looked after,

no leaks, always serviced on time. runs flawless, never had any problems with it. paint on bonnet isnt that special. been quoted 300 to have painted professionally but i was never bothered with it as it looks fine if your not fussy. theres also a slight crack in the front bar.

3 months rego with sale

$9250 negotiable

located in adelaide hills, SA

contact me on 0422 905 956 for further questions

DSCN1029.jpg

DSCN1028.jpg

DSCN1026.jpg

DSCN1030.jpg

Edited by flame_this
Link to comment
https://www.sau.com.au/forums/topic/350571-r33-m-spec-turbo-manual-ect/
Share on other sites

  • 2 weeks later...
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
    • So, now all you need to do is connect the 2 or 3x 12v feeds into the unit to permanent 12v, ACC 12V and IGN 12V that you can find in the spot behind the stereo, and the earth, and then it will switch on with the car.
×
×
  • Create New...