Jump to content
SAU Community

Lsd Oil In Bnr32 Front Diff

nuclear_skyline

By nuclear_skyline,
in General Maintenance

 Share

Recommended Posts

nuclear_skyline Mentor

nuclear_skyline

Posted
Posted

Hi guys,

I did my diff oips last night and after finishing the job realised I had put LSD oil in the front diff instead of normal oil. Do we think this is going to create issues/hurt the diff?

Thanks in advance.

Link to comment
https://www.sau.com.au/forums/topic/351325-lsd-oil-in-bnr32-front-diff/
Share on other sites
nuclear_skyline Mentor

nuclear_skyline

Posted
  • Author
Posted

Fantastic! I thought this may be the case but also thought its always better to check. I have a really irritating whine that comes on with speed. New motel box oil, diff oils, transfer case oil, checked the wheel bearings... its driving me nuts.

I think I may have the timing belt on too tight from when I changed it, but the other belts look fine.

Can worn suspension bushes cause this kind of whine with speed?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • hypergear
      GTX2867R GEN 2 NO OUTPUT FOR BOOST SOLENOID

      By hypergear · Posted

      I usually source pressure on inlet manifold after throttle body
    • timmy94
      GTX2867R GEN 2 NO OUTPUT FOR BOOST SOLENOID

      By timmy94 · Posted

      Where is the best location for boost pressure source when running mac 3port boost solenoid?  my new turbo does not have a fitting for that on the compressor housing.  how come Garrett make a turbo without that?  im confused 
    • The Bogan
      Mistakes were made, my R34 Story

      By The Bogan · Posted

      From my memory, which isn't that great, we did have issues getting the large throttle body on my old LS1 to play nicely at idle, first it would stall, then it would only idle at 2k rpm, then it would hang at 2k rpm for a few seconds and then drop and stall, then, finally, the best we got was it would hang at 1.5k rpm for a few seconds then drop to around 800 rpm The tuner stated that large cable throttle bodies are a PITA, and if I wanted anything better than what we ended up with I would need a electronic throttle body and all of the aftermarket ECU stuff to run it
    • The Bogan
      NC MX5

      By The Bogan · Posted

      So, my intake arrived  I'm not happy with the coating finish so I went to Supercheap and got some black wrinkle paint and some prep stuff I was initially thinking about using grey wrinkle paint, but finding a quality product that gives the texture I want was "unfindable...", so the tried and tested black wrinkle paint is again finding its way into the engine bay for the OEM look I'll sneakily head into work and get the big ovens cranking to cure the paint over the next week or so I've also contacted MX5 Mania today to talk about the install and tune, so painting it is my "main effort" prior to sending the car off In other news, the correspondence from the US supplier is fair to midling to say the least, I'm still trying to track down the intake box thingie with the larger intake pipe to suit the throttle body, it still is "awaiting fulfilment" (no stock currently available), if it isn't here soon I'll just get MX5 Mania to fabricate up a CAI that is easy to service the air filter  
    • gifted1
      Will r33 gtr front reo fit on r33 gtst series 1?

      By gifted1 · Posted

      Thanks mate. I thought it would be that way.
×
×
  • Create New...