Jump to content
SAU Community

Recommended Posts

I took it off the market for a bit, but have decided to sell it definately now. I've got some pics, albiet bad ones from my phone, but gives you an idea. Will be trying to get a hold of a proper camera asap. Interior is in perfect condition save for a slight wear mark on the drivers seat, exterior is in vgc, 1 small carpark dent on the right rear 1/4 and a couple of stone chips or cracks here or there.. for a 10 year old car its great. The paint is still bright and shiny, not going orange anywhere. I ran the car once at willowbank, with borrowed cheese used for tyres i was able to reel off a best of 13.2 @ 106mph with a 2.2 60foot time. I worked down to a 2.0 sec time but missed a gear, so with the tyres it has now should run a 12 without too much of a problem, especially as i found out the other week that it had a small leak in the piping which caused it to loose a lot of power below 5000rpm, and a connection for the fuel pump came disconnected and wasnt getting full voltage, therefore loosing noticable top end power. I've always kept it well maintained, and are quite fussy, so from a maintenance point of view didnt really comprimise. The only reason im selling it is because i lost my license for 2 years.. dont drive with unpaid fines and talk on a mobile!

Asking price is $17,900

5sp

D.O.T approved

R34GTT turbo

PWR front mount with custom end tanks

18" anz rims (215/35 & 245 35 tyres, all vgc)

5 puck ceramic clutch from direct clutch, only done a 2-3000km, mostly highway.

3" turbo back exhaust with split dump

POD filter mounted in front guard.

apexi twin chamber b.o.v

ngk iridium plugs

double din head unit

6x9's

Custom plates (not-04)

boost guage

Small interoir mods like silver console, billet look steering wheel etc.

Post your email address and i'll send some pics, or call me on 0412 417 187 if you want to come look at it, i live in South Brisbane, just near mater hospital

Link to comment
https://www.sau.com.au/forums/topic/35157-rb20-180sx-must-sell/
Share on other sites

got your pics.  my mates still keen on it.  how neg are you on the price?

If your interested, come have a look and see what you think first. Then if you think its un-reasonable, make an offer that you think is. Call me on 0412 417 187, im in south brisbane.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...