Jump to content
SAU Community

Fs: 6Boost Manifold & 50Mm Progate

bubba
 Share

Recommended Posts

bubba Grand Master

bubba

Posted
Posted

Ok guys, plans have changed somewhat so my manifold and gate are up for sale..

6boost T3 flanged high mount manifold with 50mm v-band gate flange. Was custom made to suit my 25/30 in 32gtst, turbo (was set up for a GT35R) has been pushed forward so that the compressor housing sits forward of the strut tower in a 32. Will suit any RB20 or RB25. $1200 firm, item located in Perth but will consider posting at buyers expense.

Turbosmart 50mm Progate (new style), $700 firm, item located in Perth but will consider posting at buyers expense.

Link to comment
https://www.sau.com.au/forums/topic/352661-fs-6boost-manifold-50mm-progate/
Share on other sites
bubba Grand Master

bubba

Posted
  • Author
Posted

Sorry guys, forgot to mention that if you want to buy the gate separate you will need to order a new weld on inlet flange from Turbosmart as Kyle (6boost) welded the flange to the manifold before he sent it to me.

http://turbosmart1.cart.net.au/store/WG50+Inlet+Weld+Flange.html

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
    • GTSBoy
      R34 25GT Engine Light 21

      By GTSBoy · Posted

      If it (the code) wasn't still current, it should have gone away by itself by now. No, nothing it 10/10. But it is quite likely. Everything else to do with the ignition could still be responsible (which is wires and connectors). The car is an old piece of shit now, so all the wires and connectors are also old pieces of shit.
×
×
  • Create New...