Jump to content
SAU Community

Recommended Posts

Hi guys,

recently purchased a 2001 v35 gt300

Heaps happy with the car just a few questions i wanted to know.

The cars an 5 speed auto and it has a A/T button with SNOW AND POWER on it.

when i switch the power button on is it supposed to behave any different? are any lights or displays come up on the dash ( as the little red light comes on the switch )

Also the same for the snow mode is there any different?

Also my car on the odd occasion goes into this stupid mode when i turn the car on the aircon stays on and i have no control over it and the radio player will not even turn on?? i have to disconnect the nbattery every thime.

What everybody avg fuel consuption?

Kind regards DArren

Link to comment
https://www.sau.com.au/forums/topic/352948-gt300-questions/
Share on other sites

radio is about to die.. welcome the start of a wonderful relationship ..

(do a search you will find it is a common thing along with locks and window motors.)

if youcan get it out (or are in brisbane) I fix them.

Link to comment
https://www.sau.com.au/forums/topic/352948-gt300-questions/#findComment-5657290
Share on other sites

Ah yes, dying radio. (Still haven't pulled it out yet Chris, yes piss poor I know)

Can't really give you a definitive fuel consumption figure (never looked)but did manage to pull just over 800km out of a tank on a trip to VIC.

Loaded with 2 adults/2 Kids and associated crap, very impressed.(Also pre-cruise control)

I think the snow button gives you 2nd gear starts(don't quote me on that one).

Cheers

Edited by gtrtech
Link to comment
https://www.sau.com.au/forums/topic/352948-gt300-questions/#findComment-5657584
Share on other sites

Had the same problem with the air con and radio when I got my V , disconnected battery , tried turning car on , then reconnected the battery an turned it on , fixed the problem , 6 months on no problems , trouble at the time was the air con was stuck on 32degrees so happy the reset fixed the problem

Link to comment
https://www.sau.com.au/forums/topic/352948-gt300-questions/#findComment-5657621
Share on other sites

Thamnks for your quick responses guys,

Has anybody got any info on the power button???

also i did notice the display that changes when you switch bettween auto and manual mode and a M is displayes followed by gear select?

i can see a S but it is not highlighted??

anybody know what this is??

Link to comment
https://www.sau.com.au/forums/topic/352948-gt300-questions/#findComment-5658221
Share on other sites

no probelm. keep the A/c on 23/24. that way when it does die you will at least have a comfortable climate to sit in.

snow mode = 2nd gear start with the VDC program changed a fraction.

Link to comment
https://www.sau.com.au/forums/topic/352948-gt300-questions/#findComment-5658228
Share on other sites

  • 2 weeks later...

Thamnks for your quick responses guys,

Has anybody got any info on the power button???

also i did notice the display that changes when you switch bettween auto and manual mode and a M is displayes followed by gear select?

i can see a S but it is not highlighted??

anybody know what this is??

I lov that power button and I think(not sure) it just gives you more power and smooth transition+more fuel consumption of course. Once you turn it on, you will see that your car will respond quicker and the engine sound will change slightly (sounds good anyway). Owhen you press that button, it becomes green or yellow, cant remeber exactly what colour it was.

About the second question, it is pretty straight forward, if it is automatic, it simply displays 'D' and if you switch to manual, you will see the numbers. I have never seen S or M. I have 2001 300GT too. About the snow mode, I'm not sure whether you have ever had a chance to drive on snow. Basically, you would not use brake while going down a slope, you would rather use engine brake to slow down the vehicle. Imagine you are driving your car in automatic mode, the car will speed up while going down. Then you need to brake to slow down. This button will possibly do the job for you so you would not need to brake. On the other hand if you brake, the wheels might get locked and then you might loose control. Once again thats what I think.

Link to comment
https://www.sau.com.au/forums/topic/352948-gt300-questions/#findComment-5689833
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • That looks good, but I think you're going to need much beefier side skirts now.
    • They are daft and there's a reason it never caught on. Steering feel? We don't need no stinking steering feel!
    • I gotta pull you up on this. It's driving me crazy. A shutter is something that closes, like over a window or in a cmera. The word you want is shudder. That LSD is clearly f**ked. Take it to a diff shop and get it disassembled and examined by an expert. YOu might have plates welded together or something equally crazy.
    • Define "starting to fail". Wy not just rebuild them?
    • Check the Nistune doco. There are a few assumptions being made here that might not be valid. I will list the things that occur to me: Base map. Base map for what? Base map for Z32? Then the cranking pulse width is probably wrong for an RB25. The extra 500cc of capacity might well be enough to prevent it from catching. Base map for RB25? I don't think you can load one of those into a Z32. You have to just make the settings correct for an RB25 in the Z32 base map. That is either K or the TIM to get the pulsewidth right. Loom. You bought a loom for an RB. And you plugged it into a Z32 ECU. Did you make sure that any iwre differences were swapped. From memory, there's at least a couple. And as per the others, I would suggest making sure that the fuel pressure is correct while cranking and that the injectors are actually flowing as expected. They really must come out and go on the bench, unless you do find that you have messed up as per above points. I would also suggest watching in Nistune to make sure that everything is reading correctly. That the correct binary flags are raised at the right time (like the crank signal), that there's no stupid values in K or TIM. That you have not got mismatched firmware for the ECU and/or a wrong image loaded.
×
×
  • Create New...