Jump to content
SAU Community

Recommended Posts

Hi,

I have an R32 GTS4. This pic is of my right-rear sub frame. I think that the bush is broken as a sticky grey liquid is coming out of it.  

Can pineapples be used in place of this bush?

Yes the bush is stuffed. That is the silicon gel that is used in a few of the skyline bushes leaking out. The front castor bushes will leak when they need replacing too.

No, pineapples can not be used to replace this bush. I have been told they can help reduce the effects of the stuffed bush, i.e. fit pineapple bush over top of the stuffed subframe bush to lock it into place, but that the best remedy is to replace the bush - of course

That being said you can fit the pineapples($120 set~) without taking the whole subframe off the car which I'm pretty sure you need to do to replace the subframe bushes. A friend of mine replaced his sub-frame bushes in his gts4, he said it was a bit of work.

check out this address, they have subframe bushes. I have tried quite a few places for these bushes and so far have held off doing it because of cost. The price at this place doesnt seem to bad. They may know how much it is to fit them also.

http://www.uniqueautosports.com/pricelists...%20steering.htm

Stephen

Thanks Stephen,

I checked it out with Unique Autosports who said that the labour would be around $1500 (!?!?!) because the job is a pain. I spoke to a guy named Tim there who said that the job is such a pain that they have only done it five times.

I asked him about the pineapples and he said that is what most people do because of the cost of replacing the bushes.

I also called Advan at Silverwater. They said that they would fit aluminium bushes which they reckon are better for $905. I also asked him about pineapples and he said that they we no good and went on for a little bit about how they split and were a waste of time. He said that I would be better off waiting until I had the money to do the job properly.

This is pretty scary stuff – there is no way that I am paying someone $1000 to replace these bushes. You said that your friend did the job himself (I’m happy to get in and do it myself). When it can time to get the old bushes out did he need to get them welded out or did they come out with a press only? Is it at all possible for your friend to describe the process – I would like to know what I’m getting myself into before I do something dumb.

I think he said something about burning the rubber out, I would think if you had access to a good press that you could do it. I think it is a very big job to do, you have to take out the whole subframe. My friend is a mechanic so that gave him a head start. I will see if he can post a reply.

Stephen

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Skyline R33 Series 2 sedan tail lights in excellent condition. These are becoming harder to find, especially in this state.    BOTH SETS ARE IN FANTASTIC CONDITION (REFER TO PHOTOS)    ✅ No broken covers or cracks ✅ Lenses are in flawless condition ✅ All rear mounting lugs intact ✅ Comes complete as pictured ✅ Perfect for restoration, replacement, or upgrade   These lights are ready to go, no surprises just quality OEM parts.   These are definitely one of the better sets we have seen in a while. With minimal wear and tear they will come as you see. Bear in mind they are not brand new they are almost 30 years old now. To find them in this condition isn’t easy they can only be obtained on the second hand market.   Australia Wide Postage Available At Buyers Expense. Silver Set:$850 Grey Set:$850 PM Me for purchase or any other questions  IMG_2166.dng IMG_2165.dng IMG_2172.dng IMG_2173.dng IMG_2174.dng IMG_2179.dng IMG_2180.dng IMG_2260.dng IMG_2258.dng IMG_2259.dng IMG_2261.dng IMG_2266.dng IMG_2273.dng IMG_2274.dng IMG_2276.dng
    • Unsolicited advice? Keep the engine as close to stock as you can. Nothing wrong with adding some boost and making a little more power, but given where you are, you really don't want to try to make it into a monster. I can't imagine the roads are up to it, and the lack of locla support when it grenades will be a ball ache. FWIW, If there is a dyno around that you can access, then brand new injectors are a good idea, which will lead you to (at least) putting a Nistune in it, which will allow you to put an R35 AFM on it, all of which will make it possible to make it much much nicer to drive and live with.
    • List all of your mods. It sounds like an aftermarket ECU hitting rev limiter. Like a valet mode, or a cold rpm limiter? 
    • @Kapr Haha yeah thats the one. I missed that you had a built up engine, I wouldn't want to run it on there either then. It was good in my situation just to replace the original turbo on a stock engine. @MBS206Yep definitely not a replacement for anything name brand
    • You are selling this? I have never bought something from marketplace...i dont know if i trust that enough. And the price is little bit "too" good...
×
×
  • Create New...