Jump to content
SAU Community

Recommended Posts

Hi Folks,

i recently acquired simons old 32 4door, and i wanna learn the drifting basics, however i really dont wanna do it on the streets.

just wondering if you guys could give me a run down of what a drift practice day is like? people forgiving when you spin? ect.

Also what do you normally budget for one of these practice days? taking into account Tires, petrol, fee's ect.

any other information would be much appriciated.

thanks all.

i should also mention im no stranger to motor sport, just new to the drift scene

Edited by Stagea_G
Link to comment
https://www.sau.com.au/forums/topic/353276-drift-practice-days/
Share on other sites

Most pepole are quiet good just genral good manuers g a long way u spin get of track let next car pass slowly move back on i runn new tyress each meent i budget around 900 fuel for tow car and drift car new oil and filter an tyres on a budget u could do it easly under 500. BUt always a good night out

Most pepole are quiet good just genral good manuers g a long way u spin get of track let next car pass slowly move back on i runn new tyress each meent i budget around 900 fuel for tow car and drift car new oil and filter an tyres on a budget u could do it easly under 500. BUt always a good night out

Most people are quite good, general good manners will go a long way. If you spin, make sure you get off the track and let the traffic pass. Once traffic clears, slowly re-enter the track.

I run new tyres each meet, and budget around 900 including fuel for tow car, fuel for drift car, new oil and filter, and tyres. On a budget, you could easily do it for under $500. But it is always a good night out.

^^^ lol Damo on the translation :D

But in all honesty Grant, SAU is not a big drifting community - you will find a handful of drifters on here, but the vast majority hang out/post on NissianSilvia.com

You are obviously welcome on SAU, but this sort of thread will get a MUCH larger response on NS.com

The drift days are pretty cruisey, 90% of the people are out there to just have a good time.

As far as spinning out, there is etiquette to it, and generally if you spin out its not cool to sit there and do ringing/static skids mainly because it ruins the persons lap after you because they need to stop/slow down if there is a massive cloud of smoke so if you spin, get out the way asap but hey, every now and then if you loose it and get a bit frustrated a static skid can be good to releive yourself and its not so much of a problem. Everything in good balance man.

Don't bother with 2nd hand tyres IMO - they delam straight away, at the price they cost its not worth it, and then the track time you loose going back into the pits getting them changed etc all the time is wasting money aswell because time out on the track is $$$$$$.

~$100 for a tow out (petrol for the tow car & trailer hire)

~$30 worth of fuel in the drift car?

~$50 new oil/filter each session

$90 entry fee

$10 gate entry fee

$25 cams license (one year license can be purchased for $55 but you need to be apart of a club etc)

~$160 tyres... I can get tyres at $80ea loose brand new so a set usually lasts me a night if I don't do statics everywhere lol (good to carry a 2nd set incase you need to trailer up early due to running out of tyres)

Then you start breaking shit and then it gets expensive >_<

Get onto the drift school session May 7th.

Lots & lots of track time, $150 to enter? close to that but its so so worth it. Get great pointers from the big boys in the drift scene and is a GREAT day out... I did that for my first session ever and I am HANGIN' for the next one... in fact thats when I'll have my car ready again (lots of new goodies)

Good times! :laugh:

Just make sure you keep it fun haha

164770_485643353542_722233542_5943401_7275699_n.jpg

dont scando's into turn 1 unless u want your car to look liks this :laugh:

+1 to what Weezy said, dont be a idoit, there are other people on the track and doing burnouts/donuts just ruins it for them, dont drift around cars that have spun

if you really want to learn going to drift school or a private day is way better, drift school is great for practicing the basics, public days are a waste of money and full of idoits who think they are drift king

f**k ns.

Those cvnts are all proffessional drifters on need for speed underground a think they know all.

SAU needs more drifters on here that are just relaxed and do it for fun. Much Like we already have, so cheers for joining !!

As for an oil and filter change after every prac, that's up to you...I would say every 2 -3 peace pending what sort of oil temps your seeing and what your using...

I personally can't see the point of putting 50 bucks worth if oil over the neighbors fence onto her veg garden after 1

Hours worth of driving...

Tyres defs go brand new, there cheap as hell these days.

Get your cams license, other wise your throwing Monet away.

And make sure your tank is FULL and or get a surge tank

I killed my first RB at my first ever prac...

I generally budget 500 bucks per prac, then just hope like f**k nothing brakes..... Which it will.

:thumbsup:

Yea unfortunately im not a fan on NS.com, certain reasons which im sure most people agree on.

i guess the best way is to just get out and try. but i still appreciate anything, anyone has to say.

Just trying to get to the forum is hard enough these days. Downtime all over the shop since it was redesigned.

Not to mention the malware you get from the site lol.

  • Like 1
  • Nope 1

very one out there is pretty chilled, Yeah static burnouts/ donuts are a big no no, If there are marshals on the track, go slow past them like 25km max.

Yeah about $500 sounds about what I spend each prack, fuel entry tires ect.

If you spin Check if car are coming if you are gonna slow another coming car wait off the track, if you can get back out without slowing anyone down get straight back out.

Servicing I Put-mine up on a hoist check everything is tight before every practice/ comp get the tape measure out check my toe are about right, Change the engine oil after every 2nd or 3rd session depending on what it looks like. I replace tho oil filter after every session tho cheap insurance.

Nah go big scandos into turn 1 youll get good at panel beating

heres what mine looked like after the Jan practice

http://www.facebook.com/permalink.php?story_fbid=110003079075368&id=100001808548760&ref=notif&notif_t=like#!/photo.php?id=100001808548760&pid=155866&fbid=122455327824751

Much straighter now tho

Yeah I have been out to every practice in 2010 and plan to do the same this year as well as doing all the comps, get into it youll have a ball

  • Like 1

Most people are quite good, general good manners will go a long way. If you spin, make sure you get off the track and let the traffic pass. Once traffic clears, slowly re-enter the track.

I run new tyres each meet, and budget around 900 including fuel for tow car, fuel for drift car, new oil and filter, and tyres. On a budget, you could easily do it for under $500. But it is always a good night out.

Sorry about my bad english,

Also 500 is a good figure to budget on,but be aware that u may have breakages clutch,diff,gearbox,turbo.

All in all most pepole are out there for the fun of it and are not going to crack the shit if u spin and ruin there lap, but make sure u dont cut no one of and all will be good.

So when should we excpect to see you out a prac.

To someones comment above drift schhol is awesome i had been out to 3 pracs previously but drift school helped me improve alot and boost confidence.

Cheers bayden

Just don't go out there in a complete bucket of shit. Make sure everything works how you want it too.

I went out there a few times knowing the handbrake was cooked and all I did was spin all day and eventually f**ked the car on the inside of turn 1 ripple. Watch out for that one!

One thing I noticed, people are willing to help you out when they can. I got heaps of help from randoms when I f**ked my car. Just have fun and don't don't shit to serious.

And As Import S13 said be careful of the turn 1 inside ripple strip.

I bent a strut hitting it, several other cars have done suspension damage hitting it.

Evan Daws rolled his R31 a couple of years back hitting it.

Yeah its nasty

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...