Jump to content
SAU Community

Recommended Posts

Hello everyone!

Im back home in Australia again (in japan teaching most of the year for the last 4 years).

After a lot of requests last time i filled all the spare room in my suitcase with R32 GTS-T clear indicators (the factory ones, not aftermarket!)

Also quite some bits still here from my past trips home. Cant find the old thread link anymore.

Important- R32 GTR and GTS indicators are NOT interchangeable (different size, GTR ones fit the wider guards).

pic of the whole GTS lot. Close ups of each below.

post-21158-0-96930200-1297557543_thumb.jpg

Pair 1, excellent condition, clean with all mounting points, no cracks in them, No bulbs/loom. $145 (pair)

post-21158-0-24701700-1297557605_thumb.jpg

Pair 2, excellent condition, clean with all mounting points, no cracks in them, Includes bulbs/loom. $150 (pair)

post-21158-0-96185300-1297557626_thumb.jpg

Pair 3, Crap condition - please see pic. both have a small area with what appears to be glue? Would be fine for a drifter etc. $65 (pair)

RHS(driver) has small cracks + missing side point.

LHS(passenger) top mounting is there but damaged (missing small section) Would suggest using a washer when mounting.

post-21158-0-51110100-1297557641_thumb.jpg

Single Passenger side LHS, Top mounting tab has a small split. Would suggest using a washer when mounting. $60

post-21158-0-66958700-1297557661_thumb.jpg

3x Drivers side (RHS) please see pic.

5- Excellent condition with loom and bulbs $75

6- Excellent condition, small glue spot on back of top black edge strip. with loom/bulbs $65

7- Excellent condition, no loom or bulbs. $65

post-21158-0-11518600-1297557682_thumb.jpg

Postage:

Pickup is welcome from Kyogle 2474. Or i can post them $8 in NSW or $12 interstate. Registered post(includes insurance/tracking number).

I have tried to describe them as best and as honestly as i can. Please email or PM if you would like close up photos. Bulbs have NOT been tested.

Email will always get my attention and i will try check the thread daily. If the thread is getting old please email as i will be back in japan in 2 months (early april).

Martin Marschall,

[email protected]

(02)66333131 (best in the evening)

and other leftovers list:

HKS water temp gauge with wiring and sensor $80 Small ding on edge of metal surround (please see pic)

post-21158-0-39668300-1297559384_thumb.jpg

Z32 JDM AFMs

$200 With pod and plug/wire removed from R32 GTS-t

$150 with plug/wire in excellent condition (NOT the cheap copies on ebay)

$90 Purchased from a wrecker in japan as "tested working" however the mesh is damaged.

post-21158-0-87039700-1297560505_thumb.jpg

R32 GTR indicators $75 each - have made close ups of each, please PM your email address and ill send them to you.

post-21158-0-16455800-1297560567_thumb.jpg

R32 GTS indicators- orange drivers side x3 (people seem to crash on the passenger side more!?) $40 each

post-21158-0-14703900-1297561783_thumb.jpg

And GTR (R32 and R33) triple gauges... I bought a whole bunch of these back some time ago. $50-$120

The R33 GTR has a torque split gauge so is not really suitable for RWD cars but they have carbon fiber style surrounds and do look cool.

Again i can send/upload close up pics of each if anyone's interested in these. The one odd big one is a R34 GTT dash center console top unit.

post-21158-0-34369500-1297561934_thumb.jpg

Thanks for looking! :)

Martin Marschall,

[email protected]

(02)66333131 (best in the evening)

Link to comment
https://www.sau.com.au/forums/topic/353758-r32-gts-t-and-gtr-front-indicators/
Share on other sites

  • 3 weeks later...
  • 5 months later...

Hey mate, still got a passenger side gtst one for loom ??

wow, thread back from the dead!

and yes sir, loom with plugs/bulb sockets available and most the other items are still here + more bits brought back on this trip!

Please email me ([email protected]) if you would like photos. $10 for one (or free with an indicator!)

I will be here in Aus until the 29th of this month (29/09/11) after that i will be back in japan teaching again for 4 months but can ask my father to post anything if needed.

kind regards,

martin

  • 3 weeks later...
  • 2 weeks later...

hi mate i need a pair of indicators (pair 2) in excellent cond to pass a rwc i have had alot of dramas with trying to find a pair to pass rwc plz text me on 0435837997 (ray) if you have any i know where i can get a pair asap

  • 11 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...