Jump to content
SAU Community

R32 Gts-T And Gtr Front Indicators

mmarschall
 Share

Recommended Posts

mmarschall Enthusiast

mmarschall

Posted
Posted

Hello everyone!

Im back home in Australia again (in japan teaching most of the year for the last 4 years).

After a lot of requests last time i filled all the spare room in my suitcase with R32 GTS-T clear indicators (the factory ones, not aftermarket!)

Also quite some bits still here from my past trips home. Cant find the old thread link anymore.

Important- R32 GTR and GTS indicators are NOT interchangeable (different size, GTR ones fit the wider guards).

pic of the whole GTS lot. Close ups of each below.

post-21158-0-96930200-1297557543_thumb.jpg

Pair 1, excellent condition, clean with all mounting points, no cracks in them, No bulbs/loom. $145 (pair)

post-21158-0-24701700-1297557605_thumb.jpg

Pair 2, excellent condition, clean with all mounting points, no cracks in them, Includes bulbs/loom. $150 (pair)

post-21158-0-96185300-1297557626_thumb.jpg

Pair 3, Crap condition - please see pic. both have a small area with what appears to be glue? Would be fine for a drifter etc. $65 (pair)

RHS(driver) has small cracks + missing side point.

LHS(passenger) top mounting is there but damaged (missing small section) Would suggest using a washer when mounting.

post-21158-0-51110100-1297557641_thumb.jpg

Single Passenger side LHS, Top mounting tab has a small split. Would suggest using a washer when mounting. $60

post-21158-0-66958700-1297557661_thumb.jpg

3x Drivers side (RHS) please see pic.

5- Excellent condition with loom and bulbs $75

6- Excellent condition, small glue spot on back of top black edge strip. with loom/bulbs $65

7- Excellent condition, no loom or bulbs. $65

post-21158-0-11518600-1297557682_thumb.jpg

Postage:

Pickup is welcome from Kyogle 2474. Or i can post them $8 in NSW or $12 interstate. Registered post(includes insurance/tracking number).

I have tried to describe them as best and as honestly as i can. Please email or PM if you would like close up photos. Bulbs have NOT been tested.

Email will always get my attention and i will try check the thread daily. If the thread is getting old please email as i will be back in japan in 2 months (early april).

Martin Marschall,

[email protected]

(02)66333131 (best in the evening)

and other leftovers list:

HKS water temp gauge with wiring and sensor $80 Small ding on edge of metal surround (please see pic)

post-21158-0-39668300-1297559384_thumb.jpg

Z32 JDM AFMs

$200 With pod and plug/wire removed from R32 GTS-t

$150 with plug/wire in excellent condition (NOT the cheap copies on ebay)

$90 Purchased from a wrecker in japan as "tested working" however the mesh is damaged.

post-21158-0-87039700-1297560505_thumb.jpg

R32 GTR indicators $75 each - have made close ups of each, please PM your email address and ill send them to you.

post-21158-0-16455800-1297560567_thumb.jpg

R32 GTS indicators- orange drivers side x3 (people seem to crash on the passenger side more!?) $40 each

post-21158-0-14703900-1297561783_thumb.jpg

And GTR (R32 and R33) triple gauges... I bought a whole bunch of these back some time ago. $50-$120

The R33 GTR has a torque split gauge so is not really suitable for RWD cars but they have carbon fiber style surrounds and do look cool.

Again i can send/upload close up pics of each if anyone's interested in these. The one odd big one is a R34 GTT dash center console top unit.

post-21158-0-34369500-1297561934_thumb.jpg

Thanks for looking! :)

Martin Marschall,

[email protected]

(02)66333131 (best in the evening)

Link to comment
https://www.sau.com.au/forums/topic/353758-r32-gts-t-and-gtr-front-indicators/
Share on other sites
  • 3 weeks later...
  • 5 months later...
mmarschall Enthusiast

mmarschall

Posted
  • Author
Posted

Hey mate, still got a passenger side gtst one for loom ??

wow, thread back from the dead!

and yes sir, loom with plugs/bulb sockets available and most the other items are still here + more bits brought back on this trip!

Please email me ([email protected]) if you would like photos. $10 for one (or free with an indicator!)

I will be here in Aus until the 29th of this month (29/09/11) after that i will be back in japan teaching again for 4 months but can ask my father to post anything if needed.

kind regards,

martin

  • 3 weeks later...
  • 2 weeks later...
fresco1984 Rookie

fresco1984

Posted
Posted

hi mate i need a pair of indicators (pair 2) in excellent cond to pass a rwc i have had alot of dramas with trying to find a pair to pass rwc plz text me on 0435837997 (ray) if you have any i know where i can get a pair asap

  • 11 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      NC MX5

      By Dose Pipe Sutututu · Posted

      Lamb roast on Saturday will be different 🥲
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • GTSBoy
      RB25DET with solid lifters - which cams ?

      By GTSBoy · Posted

      I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • TurboTapin
      RB25DET with solid lifters - which cams ?

      By TurboTapin · Posted

      I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • TurboTapin
      Why am I hitting a power wall with my stroked RB25?

      By TurboTapin · Posted

      I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...