Jump to content
SAU Community

Recommended Posts

Hello everyone!

Im back home in Australia again (in japan teaching most of the year for the last 4 years).

After a lot of requests last time i filled all the spare room in my suitcase with R32 GTS-T clear indicators (the factory ones, not aftermarket!)

Also quite some bits still here from my past trips home. Cant find the old thread link anymore.

Important- R32 GTR and GTS indicators are NOT interchangeable (different size, GTR ones fit the wider guards).

pic of the whole GTS lot. Close ups of each below.

post-21158-0-96930200-1297557543_thumb.jpg

Pair 1, excellent condition, clean with all mounting points, no cracks in them, No bulbs/loom. $145 (pair)

post-21158-0-24701700-1297557605_thumb.jpg

Pair 2, excellent condition, clean with all mounting points, no cracks in them, Includes bulbs/loom. $150 (pair)

post-21158-0-96185300-1297557626_thumb.jpg

Pair 3, Crap condition - please see pic. both have a small area with what appears to be glue? Would be fine for a drifter etc. $65 (pair)

RHS(driver) has small cracks + missing side point.

LHS(passenger) top mounting is there but damaged (missing small section) Would suggest using a washer when mounting.

post-21158-0-51110100-1297557641_thumb.jpg

Single Passenger side LHS, Top mounting tab has a small split. Would suggest using a washer when mounting. $60

post-21158-0-66958700-1297557661_thumb.jpg

3x Drivers side (RHS) please see pic.

5- Excellent condition with loom and bulbs $75

6- Excellent condition, small glue spot on back of top black edge strip. with loom/bulbs $65

7- Excellent condition, no loom or bulbs. $65

post-21158-0-11518600-1297557682_thumb.jpg

Postage:

Pickup is welcome from Kyogle 2474. Or i can post them $8 in NSW or $12 interstate. Registered post(includes insurance/tracking number).

I have tried to describe them as best and as honestly as i can. Please email or PM if you would like close up photos. Bulbs have NOT been tested.

Email will always get my attention and i will try check the thread daily. If the thread is getting old please email as i will be back in japan in 2 months (early april).

Martin Marschall,

[email protected]

(02)66333131 (best in the evening)

and other leftovers list:

HKS water temp gauge with wiring and sensor $80 Small ding on edge of metal surround (please see pic)

post-21158-0-39668300-1297559384_thumb.jpg

Z32 JDM AFMs

$200 With pod and plug/wire removed from R32 GTS-t

$150 with plug/wire in excellent condition (NOT the cheap copies on ebay)

$90 Purchased from a wrecker in japan as "tested working" however the mesh is damaged.

post-21158-0-87039700-1297560505_thumb.jpg

R32 GTR indicators $75 each - have made close ups of each, please PM your email address and ill send them to you.

post-21158-0-16455800-1297560567_thumb.jpg

R32 GTS indicators- orange drivers side x3 (people seem to crash on the passenger side more!?) $40 each

post-21158-0-14703900-1297561783_thumb.jpg

And GTR (R32 and R33) triple gauges... I bought a whole bunch of these back some time ago. $50-$120

The R33 GTR has a torque split gauge so is not really suitable for RWD cars but they have carbon fiber style surrounds and do look cool.

Again i can send/upload close up pics of each if anyone's interested in these. The one odd big one is a R34 GTT dash center console top unit.

post-21158-0-34369500-1297561934_thumb.jpg

Thanks for looking! :)

Martin Marschall,

[email protected]

(02)66333131 (best in the evening)

Link to comment
https://www.sau.com.au/forums/topic/353758-r32-gts-t-and-gtr-front-indicators/
Share on other sites

  • 3 weeks later...
  • 5 months later...

Hey mate, still got a passenger side gtst one for loom ??

wow, thread back from the dead!

and yes sir, loom with plugs/bulb sockets available and most the other items are still here + more bits brought back on this trip!

Please email me ([email protected]) if you would like photos. $10 for one (or free with an indicator!)

I will be here in Aus until the 29th of this month (29/09/11) after that i will be back in japan teaching again for 4 months but can ask my father to post anything if needed.

kind regards,

martin

  • 3 weeks later...
  • 2 weeks later...

hi mate i need a pair of indicators (pair 2) in excellent cond to pass a rwc i have had alot of dramas with trying to find a pair to pass rwc plz text me on 0435837997 (ray) if you have any i know where i can get a pair asap

  • 11 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi guys . Can someone help me  I bought an Android screen for my Nissan fuga but it won't turn on   
    • My guesstimate, with no real numbers to back it up, is it won't effect it greatly at all.its not a huge change in position, and I can't see the air flow changing from in turbulence that much based on distance, and what's in front of it. Johnny and Brad may have some more numbers to share from experience though.
    • Which solenoid? Why was it changed? Again, why was this done? ...well, these wear..but ultimately, why was it changed? Did you reset the idle voltage level after fitment? I'm just a tad confused ~ the flash code doesn't allude to these items being faulty, so in my mind the only reason to change these things, would be some drive-ability issue....and if that's the case, what was the problem? Those questions aside, check if the dropping resistor is OK ...should be 11~14 ohms (TCU doesn't throw a flash code for this) ~ also, these TCU designs have full time power (to keep fault code RAM alive), and I think that'll throw a logic code (as opposed to the 10 hardware codes), if that power is missing (or the ram has gone bad in the TCU, which you can check..but that's another story here perhaps).
    • Question for people who "know stuff" I am looking at doing the new intake like the one in the picture (the pictured is designed for the OEM TB and intake plenum), this design has the filter behind the front bar, but, the filter sits where the OEM duct heads into the front bar, and the standard aperture when the OEM ducting is removed allows the filter to pulled back out of the front bar into the engine bay for servicing, a simple blanking plate is used to seal the aperture behind the filter This will require a 45° silicone hose from the TB, like the alloy pipe that is currently there, to another 45° silicone hose to get a straight run to the aperture in the front bar Question: how will it effect the tune if I move the MAF about 100-150mm forward, the red is around where my MAF is currently, and the green would be where it would end up Like this This is the hole the filter goes through  Ends up like this LOL..Cheers    
    • Despite the level up question, actually I do know what that is....it is a pressure sender wire.  So check out around the oil filter for an oil pressure sender, or maybe fuel pressure near the filter or on the engine. Possibly but less likely coolant pressure sensor because they tend to be combined temp/pressure senders if you have one. Could also be brake pressure (in a brake line somewhere pre ABS) but maybe I'm the only one that has that on a skyline.
×
×
  • Create New...