Jump to content
SAU Community

Recommended Posts

Hi guys,

Ive had a bit a of a search and found some interesting points, but i wanted to get some situation specific responses.

Ok, so ive got an R34GTT with a Neo engine in it, Its had quite a bit of mods to it, if you like i can list ?

some basics (cam, exhaust, intercooler, injectors, fuel pump, k&n pod, pfc, etc etc) standard radiator and fan im sure

ive just noticed yesterday while driving it around that the warning light on the water temp gauge was flashing (apexi water temp gauge) when the water temp reached 90deg C

Im not 100% but Im pretty sure it normally sits around 82-86deg C, and yesterday was the first time ive noticed it do this before. It was about 36degC during the day.

I did notice that it got higher temp sat in traffic or at lights, and while driving dropped to approx 88, i dont think the air con made a real difference whether it was on or not.

this leads me think perhaps thermostat, or radiator or fan are an issue?

It didnt get any higher than the 92 deg C, but I am worried that there might be a problem that if left untreated could cause some serious damage to the engine.

It is going for a service on monday next week but i dont want to kill it before then if its a problem =\

any pointers would be great!

Link to comment
https://www.sau.com.au/forums/topic/353982-rb25-neo-water-temp/
Share on other sites

36deg ambient temp and stuck in traffic.. 92deg water temp doesn't seem that bad, if it's going over 100deg on the street I would be getting worried. Even with big burnouts on a 40deg in my skyline I've never seen over 105deg (and even that didn't throw any coolant out, with the pressure and additives, boiling point is about 110deg).

ok, that doesnt sound too bad.

is it possible the warning light is calibrated slightly low? cause it has never come on before that ive noticed??

i will still get the mechanic to check cooling system make sure its all ok.

thanks for your reply bubba!

Well the Neo's do run hotter than the earlier RB's (82deg thermostat as opposed to the 76.5deg on my 32) so for the warning light to come on at 90deg it could be calibrated a bit too low (most aftermarket gauges with warning lamps, the warning level should be able to be adjusted).

By all means, get your mechanic to test the cooling system, radiator could have some crap in it that is moving about.

The radiators in our cars (I'm assuming the 34GTT has the same thickness radiator as my Stagea and Skyline standard) are woefully thin for our climate. GTR radiators are almost twice as thick and was what I upgraded to in my 32, I had an ebay spec alloy radiator but wasn't happy with the operating temps (would hold at about 80deg for a while until it heatsoaked, then it would rocket up to 95ish very quickly) so ditched it in favour of the GTR radiator.

cool

thanks man! i greatly appreciate it

the radiator isnt very thick at all, so i might look at getting a gtr one, should be fairly easy to fit i imagine??? i removed one from my old 180sx once and that wasnt too hard so it cant be too different can it?!

we'll see what the mechanic says

thanks again bubba

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I mean it's a bit late to say "This won't have any tangible effect and it is not worth spending more than about three seconds on it, please just enjoy the car" But I said it anyway. Does the pod actually get any airflow in that position behind a bumper like that?
    • Hey guys - apologies for digging this up. Has this website been shutdown or is the outage temporary?
    • So, went shopping at Just Jap for things that might work for the intake  After some trial fitting there I ended up with a 3" x 45° silicone bend, a 3" x 300mm alloy straight, and a humped joiner, some minor trimming will be required to shorten some of the stuff, but nothing that is beyond my "ham fisted" skills The guy at Just Jap was most helpful as we had all sorts of joiners,  bends and stuff out trial fitting  Laying it out above the stuff in there it seems everything will fit nicely, and looking at it, it is probably the way I should have been looking at doing it from the beginning, probably..... In the end it is a front bar off job anyway to remove the original stuff behind the front bar that is taking up the required realestate needed, so maybe a Thursday or Friday job And because I'm a hopeless consumer, I grabbed some new steel wheel nuts, the current ones are a spline drive type with a "security" socket, that somehow someone keeps misplacing, the new ones are a basic black steel 17mm hex socket In other news: I just did my "final" tax return, I am now officially a old retired veteran pensioner, and I'm milking the system for all it's worth,  life is good
    • I hadn't thought about the variable power steering assist. Presumably, it will always be the same level of assist as you get in an S14. The R32/3/4 are either helliishly heavy (at low speeds) if the solenoid is not powered at all, or hellishly too light (at high speed) if it is powered all the time. I presume that it is PWM controlled on those cars. I hadn't thought about the S cars not having variable assist. ugh. What crappy plebby cars they must be!  
    • Hmm yeah that is a good point. It looks like it'll just bolt in with no real issue besides maybe the bushings being different. My other concern was that 2 pin plug that I assume is used in some way to control the rack solenoid depending on the speed signal from the ecu. The DMAX rack doesn't even have that plug though so, don't think it'll matter. Might just order the rack and see how it goes. Will update this when I figure something out
×
×
  • Create New...