Jump to content
SAU Community

Recommended Posts

Hey guys,

So they are on their way out. Check engine light is on, so far its not starting to struggle or anything.. But i fear it will start soon!

Just looking for either some aftermarket ones or 2nd hand ones that have been upgraded! Hopefully i can find something relatively cheap.. But for something that will improve fuel economy/power id be willing to try string together some extra cash!

Thanks!

Send me an email or pm

[email protected]

Thanks!

Link to comment
https://www.sau.com.au/forums/topic/353994-wanted-r34-rb25de-coil-packs/
Share on other sites

Hey guys,

So they are on their way out. Check engine light is on, so far its not starting to struggle or anything.. But i fear it will start soon!

Just looking for either some aftermarket ones or 2nd hand ones that have been upgraded! Hopefully i can find something relatively cheap.. But for something that will improve fuel economy/power id be willing to try string together some extra cash!

Thanks!

Send me an email or pm

[email protected]

Thanks!

Hi,

I have brand new yellow jackets performance coils packs available to suit your Skyline.

- Power increase of 10kw+ (13hp+) at the wheels.

- Increase in torque.

- No spark blowout at higher boost.

- Improved throttle response and smoothness.

- Increased Ignition Performance.

- Improved Combustion.

- Direct Fit.

- 2 Year Warranty.

- Solid Construction.

- Cost effective.

SATISFACTION GAURANTEED

Price - $420.00 delivered via express post.

Heres a link my thread on SAU - See Here

These coils are tried and tested with over 900 sets sold worldwide.

Please PM me if you require any further information.

Cheers,

Paul.

:cheers:

still looking, need to find something cheap! Bit poor at the moment lol

Ive also got a set of used Yellow Jackets to suit which I can do for $300 delivered.

These were from one of my mates cars for only 3 weeks then he took them out after he smashed the car.

He asked me to sell them for him.

:cheers:

Awesome, Ill have a look into it.

If i have to replace them (About 80% sure atm) Ill drop you a line. Those used ones sound good, i cant afford much more at the moment! Hopefully the damage from the mechanic isnt too bad..

Though i might elect to replace a single coil for the moment with a used one... We'll see!

Car gets dropped off tomorrow, Mechanic says hold off - it might just be a dead plug! domokun.gif

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yep, the closest base tune available was for the GTT, I went with that and made all the logical changes I could find to convert it to Naturally Aspirated. It will rev fine in Neutral to redline but it will be cutting nearly 50% fuel the whole way.  If I let it tune the fuel map to start with that much less fuel it wont run right and has a hard time applying corrections.  These 50% cuts are with a fuel map already about half of what the GTT tune had.  I was having a whole lot of bogging when applying any throttle but seem to have fixed that for no load situations with very aggressive transient throttle settings. I made the corrections to my injectors with data I found for them online, FBCJC100 flowing 306cc.  I'll have to look to see if I can find the Cam section. I have the Bosch 4.9 from Haltech. My manifold pressure when watching it live is always in -5.9 psi/inHg
    • Hi My Tokico BM50 Brake master cylinder has a leak from the hole between the two outlets (M10x1) for brake pipes, I have attached a photo. Can anyone tell me what that hole is and what has failed to allow brake fluid to escape from it, I have looked on line and asked questions on UK forums but can not find the answer, if anyone can enlighten me I would be most grateful.
    • It will be a software setting. I don't believe many on here ever used AEM. And they're now a discontinued product,that's really hard to find any easy answers on. If it were Link or Haltech, someone would be able to just send you a ECU file though.
    • Yes sir am asking is there possible way from aem tuner from wiring pins 
    • Have you checked cam to crank timing and confirmed balancer marks are correct?
×
×
  • Create New...