Jump to content
SAU Community

Sard Surge Tank Setup 2X Pumps And Lines,

SRB
 Share

Recommended Posts

SRB Veteran

SRB

Posted
Posted

sard fuel collector tank 5L cuboid type

2x 280L/hr intank pumps

lines to suit r32 gtr, but could possibly be used for other models

supperted over 400awkw easily, done about 1000-1500km MAX

$1200

cost over $2k

6x denso/power enterprise injectors 1000cc twin spray RB26

$900

1000-1500km max usage

reason - upgraded fuel system to triple pump and id2000 injectors to support alot more power and E85

located in sydney will have pics over the coming days

Thanks! will look at close offers...

SRB Veteran

SRB

Posted
  • Author
Posted

Willing to separate ?>

seperate what exactly?

umm thats just tank then add 2x fuel pumps and lines buddy, thats the cylinder not the cube

Any pics of it installed in a 32R??

sorry i dont have any as i took it out and now my new system is in place...

wll have pics tomoro ran out of time today

SRB Veteran

SRB

Posted
  • Author
Posted

hey mate are the injectors to suit standed rail or 14mm cheers?

hey they are to suit 11mm, dont think they make 14mm

what pumps r they?and is the line teflon or rubber?

hey the 2 pumps inside are sard 280L/hr pumps, the line is braided hose so i assume just rubber? im not exactly sure, all speedflow fittings and also a sx fuel filter ill throw in

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Butters
      R34 GTR Speedo Drive , sensor type ?

      By Butters · Posted

      Working through possible solutions of converting my mechanical speedo.    Anyone know what type of speedo sensor the factory r34 gtr getrag has ? what the output is ? I assume its not a VSS and more a voltage like earlier speedo sensors ? Can an ECU read it ?  
    • Duncan
      spot the stagea

      By Duncan · Posted

      roof rail delete used to be a thing, they were made locally for a while too
    • AnimalGarage
      spot the stagea

      By AnimalGarage · Posted

      I can get more photos of it here soon and I plan to make a thread detailing the process. I received the car this way and it sorely needs refinishing. That is probably the most appealing photo of it. Up close it is fading, cracked, and needs to be re-glued. Depending on their condition I'm on the fence between refinishing or making a new set.  Another angle hiding the pimples and razor pumps  
    • AnimalGarage
      Can you mount the ATTESA pump in other locations?

      By AnimalGarage · Posted

      According to this thread the RS4V with build plate RC40 comes with the R200 diff @ 4.083 ratio as well (mine has said RC40 denotation). We may need to check if the axle stubs are the same pattern as well. The auto subframes have longer axles. However I think yours being a later Series 2 as well, we should have the same bolt pattern for the diff stubs. Unless your upgraded rear also has upgraded axles. Either way, I would not be opposed to pulling the covers to check so I can inspect that  fancy rear core  Also I don't have HICAS. I don't believe that should change things but I hope the people here with heaps more experience than me can correct me if I'm wrong   Let me know if you want to attempt to make this work and I can get some pictures of mine from under the car. 
    • joshuaho96
      R34 25GT Engine Light 21

      By joshuaho96 · Posted

      It's not that straightforward. For example I have had this code because my ignitor/power transistor wires were unplugged. It knows something is wrong but has no idea what it means. If you want to actually diagnose this I recommend following the service manual flowchart for code 21. Ohm out the harness, coilpacks, inspect the ECU, etc. And again, it's entirely possible for there to be no problem at all but if you're running a different coilpack it'll trigger the code because it doesn't like what it sees.
×
×
  • Create New...