Jump to content
SAU Community

Recommended Posts

I've just fitted the Willall cat-back Titanium exhaust system in conjunction with the Cobb Accessport flash using the Willall map for 98+ RON fuel. Initially, I considered the Akrapovic system but the value, the "home-grown" support and the performance offered by Willall swayed me in their direction. After a minor glitch with a scratched Cobb screen I got to drive the end result yesterday after having my Nissan dealer fit the exhaust. I've owned tuned EVO's and Porsches, ridden Superbikes for years and driven open-wheelers at track days. None have managed to combine the noise, handling and shocking acceleration of the GTR with ca. 630+ bhp. I bought the Cobb Accessport with TCM but haven't given it the 3,300 rpm launch so wait out for more feedback.

Link to comment
https://www.sau.com.au/forums/topic/355169-r35-performance-tuning-willall/
Share on other sites

I've just fitted the Willall cat-back Titanium exhaust system in conjunction with the Cobb Accessport flash using the Willall map for 98+ RON fuel. Initially, I considered the Akrapovic system but the value, the "home-grown" support and the performance offered by Willall swayed me in their direction. After a minor glitch with a scratched Cobb screen I got to drive the end result yesterday after having my Nissan dealer fit the exhaust. I've owned tuned EVO's and Porsches, ridden Superbikes for years and driven open-wheelers at track days. None have managed to combine the noise, handling and shocking acceleration of the GTR with ca. 630+ bhp. I bought the Cobb Accessport with TCM but haven't given it the 3,300 rpm launch so wait out for more feedback.

What Willall tune did you get? The Stage III 98 RON one?

  • 1 month later...

I think these cars all vary a bit but I had Cobb with Willall custom tune

and just a midpipe ages ago and gained almost 25% power at the wheels.

Its hard to work out flywheel horsepower exactly but this claim does sound

quite realistic.

I have not had a chance to go in Keirs R35 since he put the new "built"

engine and turbos on it, but with over 500 awkw that makes it approx

80% increase over std power!

Totally amazing cars. And they can hook up the power which makes them all the

more impressive.

I am sure they are plenty of commodores and falcons cruising around with

500kw at the wheels these days, but whats the point if you can't put it down?

  • 1 month later...
  • 3 weeks later...

And the result is............. the 2011 model made 313 rwkw standard and jumped to 361rwkw

with the Willall midpipe and COBB tune. Thats a 15% increase!

Car feels amazing to drive now, much more mid range torque, and the power feels more linear.

Haven't had time to get up in the hills yet, but from what i have experienced so far - Amazing difference.

  • 7 months later...
  • 3 months later...

Hi Guys, I'm sure this has been covered but I could not find - what stock power is an MY09/10 R35 GTR at the wheels, before and after Mid-pipe and Stage 1 COBB tune (98RON)???

Roughly...

Cheers,

Ed

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
    • Ahhhh... If you were putting 12V to the led in there, that's likely made it very unhappy. Chances are how you put power, was 12V across an LED that's meant to only have about 20mA through it at peak, and a forward voltage of about 1.8 to 2.4 volts. That circuit is likely only a 3V3 circuit, and will have a resistor in series with the led too. That's my guesstimate on that light, without having touched one.
    • Another vote for installing them and see how you go.  I mean, you already own them, why would you not fit them? 
    • I have had too many of those over the years, my cars have a toolkit or at minimum a cheapy multi tool thing because its too easy to be snookered by some stupid plastic clip that stops you checking the battery terminal isn't loose.
    • Basically, if there is a part# on the nissan catalogue, it is a genuine part. There is a thing called "new old stock" which is stuff made years ago but never sold (or landfilled), but it is super hit and miss what you can buy. Other than some expensive Nismo stuff there is nothing new being made that suits these cars. The only time to be a little careful is (mostly in the US I think, but maybe Japan too), Nissan started rebranding some cheap crap maintenance parts like oil filters as "Pitworks"; stay away from them, if you are buying cheap just buy whatever the local car parts shop carries The three part numbers have an explanation on Amayama: 0V005 is auto, base style 0V015 is manual 0V505 is auto, hectic momo branded ones, maximum F&F points there!
×
×
  • Create New...