Jump to content
SAU Community

Recommended Posts

Coilovers generally require an engineers certificate to demonstrate that they comply with the Australian Design Rules (ADR's) with regards to suspension travel, ride height, eyebrow height (the height from the centre of the hub to the top of the inner guard), and clearance from rubbing on full lock and full suspension travel. Height adjustable coilovers should be marked across the threads and spring perches so that an inspector (cops or rego) can identify if the heights been raised since the time of last rego inspection (to defect you!). My engineers cert was around $700, but i had a bigger suite of mods than you, think about getting one for peace of mind

All that being said it depends upon whether or not you need to be inspected upon transfer of registration or not. If you don't need a vehicle identity check then your mods won't be seen by the rego inspectors, and if you get a friendly local mechanic you should be alright. The cops around town are a mixed bag, and it depends on when and where you drive your liner and how you do so. What won't help is big chromies or a excessively loud exhaust.

Have no idea about Carbon Bonnets, but I imagine they'd be looking to see you have a 'secondary restraint' meaning that it takes two actions to open the bonnet, the pull cable in the cabin followed by the lifting the catch is ussually enough, if the catch is gone, then bonnet pins are OK (concealed type, not sharp protusion type). But as I said have no idea...

Worth considering also is that Teh Federal Department of Infrastructure and transport (forgotten what they're called these days) is looking at introducing a National Code of Pratice (NCOP) for light vehicle modifications.

Edited by Broken_R31

Just don't have it ridiculously low and I doubt you'll ever have a problem. I've got coilovers in my R33 at the moment, but when I got them fitted I asked the dude to raise the car if he believed that would be more practical lol. Just make sure you're easily over 100mm at the lowest point above ground, and you're sweet. 130mm would be preferable

I've had height adjustable coilovers in my 34 since I've had it. I made the previous owner take it past Dickson before buying it and they had no issue with them. Have been inspected roadside a few times since and never had issues with them either. YMMV.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi, i’m making a rb25det coil loom for Vag short coil. Can anybody tell me which Ecu signal wire belong to coil number 1 and 2,3,4,5,6? The connecting switch in above pic is 8 wire i think white is for +12v and black for earth.
    • Was there ever a model of the Stagea m35 that didnt have a badge on the grill? I thought I saw that somewhere, some aero edition or something? I cant find it again? davemoto
    • Its a 2002 vr-x four VQ25DET, silver. Coil overs, lowered, polished alloys and sport exhaust. Bit of a project, was sitting in a shed for a while but runs and drives great.
    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
×
×
  • Create New...