Jump to content
SAU Community

Recommended Posts

i have a bunch of stock S15 parts

Fog lights $100

aluminium radiator from just jap the top is painted in a flat black $50

overflow bottle $20

camber arms $20 for a pair (2 pairs)pair of s15 stock traction rods $30front and rear swaybars stock s15 $50

aftermarket lengthened tie rods with tie rod ends (cheap extra lock) $80 (pair)

power steering pump $140

stock cast iron manifold $100

stock water and oil lines, banjos, washers everything ($50)

Stock AFM with Pod Filter

Stock S15 Tail lights

2 aftermarket SS dump pipes for S14/15

charcoal canister and lines $20

D speed pearl white side skirts $70

ORC twin plate clutch, suit rebuild, 5 speed sr20 one $400

GT28R done less than 10k kms, straight bolt on for S13/14/15 asking $1000

5 speed sr20 gearbox speedo $60

S15 front brakes and rotors, with lines, heaps of pad and rotor left $200

S15 power FC, tuned making just shy 200rwkw on Jdm s15 motor, comes with hand controller and boost solenoid, so no need for another boost controller $1000

R32 GTR loom $70

RB30 full ACL racing bearing kit asking $200

if you have any questions, or think i might have something you want?

can post at buyers expense

0420971976

[email protected]

i can send anyone photos, happy to talk, make me offers i might take it

Edited by Single
Link to comment
https://www.sau.com.au/forums/topic/356049-rb30-s15-gtr-parts/
Share on other sites

  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I wasn’t able to replicate the sound anymore. It was a one time sound so maybe it was just coincidence but it was like small pebbles being dropped in a coke can.   should I try cleaning the MAF? It could be it’s functioning but dirty? I don’t know.
    • Update 4: Hi all. The car drives again! Haven't driven for long, only to store it in the garage again, but the test drive was successful. The coolant and oil leaks seem to be fixed for now. Temps on the engine were also very good, while moving I never even saw 80C water during the approx. 30 minute drive. Ate up all the coolant in the reservoir though so will have to fill that even more when I go to the car next time. One thing that pisses me off is that the RPM gauge is still f**ked, I even resoldered the board twice and used copper paste on the silly screws that are used as connections. Next time I take it out I'll take apart the board and fit new components, I'll see if I can get a replacement IC for it.  I have an appointment set for 22nd of September for the engine tune to 370hp. Alignment also still needs to be done. My hope is that I can get all the legal stuff over with by the end of this season. Anyone of you have advice regarding intercoolers? Currently there is an APEXI core fitted, one of those weird hybrid ones, 600x270x76. I don't think it's bad but it's not new and now I still have the chance to change it now to legally include it in the paperwork. Only issue is that the only options that would arrive in time are a HKS Type R intercooler or generic Ebay spec intercoolers comparable to a JustJap one. Ideally I'd order a Plazmaman but it takes over a month to receive which would mean making the car legal has to wait until next season. Would love to hear some input on this. Same story for my injectors, the previous owner was a nunce and put ID 1050x on the engine. They work but are obviously not ideal at "normal" power levels. But I don't see a reason to change them unless the tuner says it's necessary. I read online before buying a different exhaust that the top secret style rear diffusers won't fit due to the size of the rear resonators. My buddy and I made it work by slightly "adjusting the shape" of the mounting bracket and making some spacers out of 3d print for the mounting bolts. Fits like a charm. Just putting this here in case someone has this problem. Even the hefty HKS Silent Hi Power rear can fits without hitting anything.
    • Well they got my money but they are not getting my gearbox ! 
    • It's needed for rolling idle up, and I think it is a decider on VCT also.
    • I mean, not really. Link ECU's can absolutely still have errors from the ECU thinking it's getting a sensor it's not expecting. I would imagine the speed at the ECU level in Nistune does absolutely nothing anyway? I assume the ECU does not do any fancy TC stuff with regards to front+rear wheel speed or anything of that like anyway. Someone who uses Nistune may be more fluent in it. 
×
×
  • Create New...