Jump to content
SAU Community

Radiator Sealer

Chi100188

By Chi100188,
in Engines & Forced Induction

 Share

Recommended Posts

Chi100188 Mentor

Chi100188

Posted
Posted

Hey guys got a pin hole leak near the front of the intake manifold leaking radiator fluid....so just wondering if anyone has any experience withe Series 500 radiator sealer or the likes of the product or should i just use the loctite radiator and petrol tank repair kit?

Cheers

Chi

Link to comment
https://www.sau.com.au/forums/topic/357350-radiator-sealer/
Share on other sites
luvpsi Mentor

luvpsi

Posted
Posted

my radiator on my old commy had a split in the tank and i was topping it up at least once a day i used a radiator sealer i cant remember the name of it but it had little pieces of copper in it. worked great howevr that was on my bunky commy ute so i didnt care about blockages. but i reckon the loctite one would be great especially if its only pin hole sized

Link to comment
https://www.sau.com.au/forums/topic/357350-radiator-sealer/#findComment-5713084
Share on other sites
discopotato03 Grand Master

discopotato03

Posted
Posted

There is one in a clear plastic bottle called Car Go Metalic Seal Up , search the web and its available through Ripco and Super Heap for ~ $11 .

I have used it for a cracked head and can vouch that in a rebuilt lowish Km engine it didn't clog radiators or damage thermostats or water pump seals . This was a flat fours aluminium head BTW .

A .

Link to comment
https://www.sau.com.au/forums/topic/357350-radiator-sealer/#findComment-5713482
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      Boost cut after swap(RB25DET NEO) R34

      By GTSBoy · Posted

      Don't even try to run it on the stock ECU if you're going to have the boost controller bring boost above ~10 psi. I've already told you that. If you use the Nistune ECU, you will need to CAREFULLY read the available documentation for Neo tuning, and read some threads on the Nistune forums, to discover the various things you have to do to prevent the ECU from going bananas when the boost is too high. The is a table associated with th boost sensor that must be modified to prevent it from shitting the bed. This is just one of the things that you will need to do to the tune in Nistune, because the Neo turbo ECU will be expecting to see a number of things (such as the TCS) that are not there, and you have to block the DTCs on those. It is totally not surprising to me that you are having the problems that you are, but the solutions to these problems have been known for >15 years. So just get it done.
    • dyl33
      VOLK RACING GTC CENTRE CAPS

      By dyl33 · Posted

      Centre caps $250
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi. Sry iam not a mechanic and iam not at the car atm so i dont know 100% but they told they measure those and even try to change those. AFM they have two. Coils are new a they have my old one too. Plugs too. ECU...we have 25 NEO stock and Nistune 25 NEO.   But i dont know if any one those could be the problem and why/if/what can cause this, Only thing they did not check is fuel...but that walbro 255 is new(like 1,5 years)... That fuel pressure gauge idk...but i let them know Any suggestions?   EDIT: how can they know if it is like you say he ECU pull power when it reaches a specific boost level that is too high? Tha car has boost controler
    • Duncan
      Boost cut after swap(RB25DET NEO) R34

      By Duncan · Posted

      Can you clarify what you mean by boost cut, do you mean it misfires both when under load (driving) and when stationary and out of gear? Or does the ECU pull power when it reaches a specific boost level that is too high (boost control issue)? Does it occur at idle with no throttle? When you say "the ECU is OK", what ECU is it and why do you think it is OK? Have you used the NEO ECU, and if so do you have a MAP sensor attached? Same for the AFM, why do you think it is OK? Do you have any way to put a fuel pressure gauge on it (even just a mechanical one between the fuel filter and fuel rail)?
    • Kapr
      Boost cut after swap(RB25DET NEO) R34

      By Kapr · Posted

      Hi.. Just another problem. So maybe you can help. I(my mechanic) done swap from my RB20DE NEO to RB25DET NEO. Everything is OK but we have a boost cut. Coils/Plugs are ok...AFM is ok. ECU is ok. I have Walbro 255 but it "changed" sound few months ago(you can hear it ouside) you did not hear that when it was new(maybe faulty?) Sooo...what now? What can cause this boost cut? It is even when you standing still...
×
×
  • Create New...