Jump to content
SAU Community

Recommended Posts

Have you thought about Soda Blasting? I've had the paint blasted off some plastic grill parts and it looks great. I've seen it strip the ink off a coke can and the can was fine. I'll post some photos when I get home later to show you the results. I'll also find the name of the bloke that did it for me.

Link to comment
https://www.sau.com.au/forums/topic/357458-acid-bathing/#findComment-5714641
Share on other sites

cheers , yes I was considering soda blasting there's a guy in carrum downs does it..

But I ended up going to paint mobile in dandy , he recomended some industrial paint stripper and it worked a treat..

I guess the stripper I was using just wasn't toxic enough to strip powdercoat :)

Link to comment
https://www.sau.com.au/forums/topic/357458-acid-bathing/#findComment-5714729
Share on other sites

There's paint stripper and there's paint stripper. The former being a clear, glue looking stuff that seems to just fade paint after half an hour. The latter closely resembling lava in both appearance and touch that seems to make shit bubble and peel after 5 minutes. Thick gloves = necessity lol.

Link to comment
https://www.sau.com.au/forums/topic/357458-acid-bathing/#findComment-5716239
Share on other sites

yeah thats the stuff, thick brown goo the can sizzles when u shake it..

I tried 3m spray stripper. 20$ for 2 cans did nothing

some green stuff from bunnings 40$ a litre was a little better but still no good.

25$ for half a litre of the good stuff from paint supplies store, i used half a tin and job done.

Link to comment
https://www.sau.com.au/forums/topic/357458-acid-bathing/#findComment-5717705
Share on other sites

Yeah, you paint the stuff on with a paintbrush :)

You had any splash on your skin? Instant BURN.

The one the smells like ammonia?

We used to put a drop on our palms and see who could hold it out the longest...

but i've always thought they wouldn't work on powdercoating because its like baked on plastic.

Link to comment
https://www.sau.com.au/forums/topic/357458-acid-bathing/#findComment-5719110
Share on other sites

No, the one that you smell and it burns your nose just because of the fumes lol. There's no way you could put this one on your palm and see who can hold it there the longest - it starts burning instantly and leaves something of a nasty chemical burn after 5-10 seconds.

Link to comment
https://www.sau.com.au/forums/topic/357458-acid-bathing/#findComment-5719487
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Latest Posts

    • 21 is explicitly the coils detected as the issue. Is it guaranteed the actual issue? No. Just the ECU thinks it is. When you say rattling, describe it better, get an audio clip as best you can if possible.
    • Yea got me coppers. Bad news is I just put them in and the car still has the light and shakes. I also noticed I hear like rattling coming from the exhaust piping right under me. Does 21 also have a possibility of being O2 sensors?   So, coil packs are good, the harness is good, the MAF is working, and obviously the spark plugs just replaced and working.
    • Make sure you drop the GTT base tune back in, and set your injectors again, this will remove anything playing up with it you may have removed. Possibly lean there as it's normally a fast transient going THROUGH atmospheric pressure, and a turbo motor would then quickly go richer as boost builds. The only worry you MIGHT have is ignition timing, as the DE is higher compression than the DET from memory. But again, you're not in boost, so the DE motor will be a lot more forgiving at atmospheric.   Get Murray, Kinkstahs, and Johnny's input on tuning haltechs, those guys have played with tuning enough in the past to be able to help now you're past the trouble shooting stage of the MAP issue
    • @Rusty NutshI mate. Do you have a pinout diagram for the na neo auto ecu? 
    • Yeah thats the plan now. 🤞
×
×
  • Create New...