Jump to content
SAU Community

Recommended Posts

Hey bodo, when ever ya free dude I got that knobby. Just waiting for the major modification! Lemme know!

Oh got the reservoir too. Thanks jdmspares for sending me a dirty and gunk reservoir tank. Beer buying from u again.....

Hey bodo, when ever ya free dude I got that knobby. Just waiting for the major modification! Lemme know!

Oh got the reservoir too. Thanks jdmspares for sending me a dirty and gunk reservoir tank. Beer buying from u again.....

Sorry been real busy...and totally buggered. didnt reply to your message either :(

should be right to do it some time this week, as for the lights. cant remember exactly which ones they are. ill find the packaging and let you know.

Just got back from getting the wifes Beetle tinted. looks good. :woot:

Sorry been real busy...and totally buggered. didnt reply to your message either :(

should be right to do it some time this week, as for the lights. cant remember exactly which ones they are. ill find the packaging and let you know.

Just got back from getting the wifes Beetle tinted. looks good. :woot:

No worries dude, I'm on arvos this week so maybe catchup on the weekend. I've got a cold ATM so don't wanna give it to anyone else.

My sticker mistake has been fixed thanks to Troy, cuttin is back and doing one more cost and wallah. She's new!

Got my car back yesterday... Crank Angle Sensor was rooted as well so got it upgraded and new tune. Dyno attached

Mods are

R33 GTST S2

Stock motor

FMIC

Spitfires

Nismo 740cc

Walbro fuel pump

Vipec ECU

GT3076 [Low mounted & Internally Gated]

3" Exhaust with Hi-Flow Cat

4" Intake pipe

Still seems a low figure. Do you guys agree?

post-51724-0-12633300-1346362307_thumb.jpg

Edited by SCR48

That looks ok IMO, how much boost are you running? May not b a huge thing but if u dif the pump did u do the regulator aswell? I know Clint did both and he runs close beside a high flow.

Still a big improvement though!

I was going to go with a highmount setup, but the costs and cons of doing it isnt worth the money nor the power you make, which isnt a hell of a lot.

There are so many more options to go than that, but thats just me :P i would probably look at going forged if you want a beastly power with the 25, now thats worth some dosh :D

Bodo, lemme know if your free sometime before sunday this weekend? ill bug ya for the gear knob, otherwise tee it up for next weekend

Running 18psi.... Think I'll look into upgrading exhaust to 3.5" and save for highmount setup

Lot more money and not better result. is that 3076 in a .82 internally gated rear housing?

Having said that its an out come of a package instead of a turbocharger alone. As a bolton option it isn't unreasonable, and rarely any one makes their desired output in the first go. Either way, the most your are likely to see on paper with current setup is roughly 280rwkws. For trouble shooting I would drop the exhaust, try a different pod filter, and a different cooler. Some of the small alterations do make a big gain.

Ultimately a proper high mount manifold and external gate definitly helps with top end power.

Sometimes northing ever goes right does it!... driving car around last day or so and seems once i get a little happy with the right foot it starts making a strange sound in boost over 4000rpm and engine light flicks on and off.... Looks like it back to the workshop it goes on Monday. Hopefully all will be fixed for powercruise on Thursday

its likely to be an occurance of high level knock. engine light doesnt come up unless knock level goes beyound 60 means danger. the sound you heard is probably detonation. i would take it straight back to the tuner for a check up.

does the engine light blink on then off?

Yep, exactly what it does.

its likely to be an occurance of high level knock. engine light does come up unless knock level goes beyound 60 means danger. the sound you heard is probably detonation. i would take it straight back to the tuner for a check up.

already booked in monday. hopefully it gets fixed

Welcome to the world of detonation unfortunately. Not bad power for the mods. If you do little changes, such as a larger exhaust or a different pod filter, it can alter the tune a little. A lot of people don't realise this. There would be nothing wrong with the size of the exhaust, there are plenty of cars producing big hp on 3" systems, so I wouldn't be worried about that. If you want to change pods, i'd do it now before it goes back, or give them it so they can fit it before they retune it.

Welcome to the world of detonation unfortunately. Not bad power for the mods. If you do little changes, such as a larger exhaust or a different pod filter, it can alter the tune a little. A lot of people don't realise this. There would be nothing wrong with the size of the exhaust, there are plenty of cars producing big hp on 3" systems, so I wouldn't be worried about that. If you want to change pods, i'd do it now before it goes back, or give them it so they can fit it before they retune it.

It's got a new pod in the last few weeks, they just upgraded the CAS the other day and retuned it.... Maybe it's related to that...There's a thread in forced induction where someone is experiencing knock and believes its CAS related

Edited by SCR48

Welcome to the world of detonation unfortunately. Not bad power for the mods. If you do little changes, such as a larger exhaust or a different pod filter, it can alter the tune a little.

+1 to the exhaust. To many people think the exhaust is the answer when it isnt

Don't mind me just lurking around, I'm a North Sider not rocking a beasty Skyline yet.... but hopefully real soon just wanted to have a look and see what we got on the North Side :D

Edited by NFORSA

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...