Jump to content
SAU Community

Recommended Posts

Third, but I wouldn't have the torque to get it moving in third unless I rode the crap out of the clutch. Your torque converter helps a lot with that. So that's probably close to what mine will run.

Third, but I wouldn't have the torque to get it moving in third unless I rode the crap out of the clutch. Your torque converter helps a lot with that. So that's probably close to what mine will run.

Yer kinda, it's only a standard stall ATM (and its really bad putting that much load on it as u can ballon it lol) so it literally wasn't even off the converter forever so it was just a pathetically slow half track followed by it weirdly starting to pull hard from half track. Would of looked messed up from outside, weird sounding skyline that only has one gear lol

Indeed very interesting. Join us!

I did last years drag day, my first and only so far. my car was dead stock other than a cat back exhaust, no mad weight reduction. best I got was a 14.3

Now that I've done the usual cheap bolt on mods I'd be very interested to see the difference.

Launching is key to a good run, especially in a stock car.

I'll see if i can find my time slip :)

post-62717-0-37470900-1368655184_thumb.jpg

This drag day is getting more and more interesting. May have to show my face..

Show, do eeeet :)

Ill be there weather I have my car or not.... I can always post a time slip later on

yeah mate ill be there running around the track. Ill be there with the Mercury Motorsport Team. Probably wont enter any events except for the cruising. Got a pitpass which will be good. More than welcome to come for a spin

yeah mate ill be there running around the track. Ill be there with the Mercury Motorsport Team. Probably wont enter any events except for the cruising. Got a pitpass which will be good. More than welcome to come for a spin

Yours isn't the white r33 with the Lmgt1/2s on it that was roliling around at power cruise last year?

Ah ok man they shouldn't be to hard to find, just look for the yellow bloody 34 making all the noise/flames lol. But yer that'd be sick ill see how the day progresses its been over a year now since I was on track at a powerplay/cruise type event there. Was good fun lol (was also in a boaty old xd falcon with all the go and none of the stop/brakes/grip :thumbsup:

Yours isn't the white r33 with the Lmgt1/2s on it that was roliling around at power cruise last year?

Ah ok man they shouldn't be to hard to find, just look for the yellow bloody 34 making all the noise/flames lol. But yer that'd be sick ill see how the day progresses its been over a year now since I was on track at a powerplay/cruise type event there. Was good fun lol (was also in a boaty old xd falcon with all the go and none of the stop/brakes/grip :thumbsup:

No that was my mate with that car, plates were HYPD UP.. Nice car made 450hp at the rears, motor was capable of a lot more though. He has since traded it. This is mine. Was at powercruise last year and powerplay back in FEB.

33JDM2_zps66dc549a.jpg

I'd give u a lift but Im not going and couldn't take u home, but if u spray hairspray on a pen stain before u wash it the stain will be removed easier so you see that's 2 non helpful things but one helpful therefore I beat zeke :P

Oh nice :). I'm in Petrie.

However, unless you change your mind about the lift home, or unless someone else offers me a lift home, I'll have to pass.

For a gobbie I can probably give you a lift home ;)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I think Fitmit had some, have a look on there (theyre Australian as well)
    • Hah, fair enough! But if you learn with this one you can drive any other OEM manual. No modern luxury features like auto rev-matching or hillstart assist to give you a false sense of confidence. And a heavy car with not that much torque so it stalls easily. 
    • Actually, I'd say all three are the automatic option. Just the different trim levels. The manual would be RSFS, no? 
    • What Duncan said sounds right. Also, it looks like they only have the driver's mat. Not the rest. Because looking at the diagram: KG4911 is just the mat for the driver. KG4900 is the full set if I'm not mistaken and discontinued.   But, it looks like they may still have the full set for the manual S2. Might be worth checking for the other models as well as they seem slightly different. https://www.amayama.com/en/genuine-catalogs/epc/nissan-japan/stagea/wgnc34/6649-rb25det/misc/G49 Man, I'm tempted.
    • I dunno about that as a blanket statement. Pitwork is Nissan's "Nissan genuine" thing, and for stuff like timing belts, I have found them to be excellent. Of course, for things like oil filters, you always use proper trusted brands anyway, not whatever the OEM has taken to using.
×
×
  • Create New...