Jump to content
SAU Community

Recommended Posts

Hi,

I have decided to sell my Autech Stagea as i reacently bought myself an E51 Elgrand.This was my daily driver for the last year & a half and is an awsome vehicle as we know they all are.

This is in immaculate condition,Paint is the rare black with blue pearl (KJ6Z) and you couldn't falt it.Interior is in the same condition,no ciggy burns,no spill marks and no greezy marks in the cargo area.

It even comes with the factory cargo blind (see pic).I have always serviced it and lives in the garage at hme & work.

Details are as follows,

Stagea 260rs Autec version 74 xxx klms

Limited number produced with factory fitted rb26dett twin turbo GTR engine

Factory fitted brembo brakes F & R.

All wheel drive (same as r33 gtr)

Factory fitted body kit with adjustable rear wing

Factory fitted duel airbags

Factory fitted roof racks (removable)

Factory fitted front mounted intercooler (GTR)

Factory fitted series 3, 5 speed gearbox (GTR)

Factory fitted centre gagues

Aircon,pwr steer,pwr windows

Factory keyless entry

Factory fitted electric 'EASY CLOSE" tailgate

Running standard boost

Dyno tuned (comes with print out)

Aftermarket parts include,

R34 gtr factory 18x9+30 Rims all round wrapped in near new yokohama dna tyres

R34 gtr factory floor mats (f & r)

Mines ecu

Trust front pipes

Hks silent high power full 3.5inch exhaust

Hks height & damper adj coilovers

Blitz copper radiator (new)

Blitz air cleaner

Nizmo radiator cap

Nizmo oil filler cap

Nizmo single plate copper mix clutch

Nizmo short throw shifter

Greedy front & rear strut braces

Ferodo 2500 front & rear brake pads

Adr approved stainless brake lines

Phillips 4000k headlight bulbs (legal)

Castrol edge sport 10w/60 engine oil used

Motul brake fluid used

Greedy oil filter used

A pleasure to drive.It has been 100% reliable as it's well looked after.

If the missus wont let you buy a GTR im sure you could talk her into this!

Rear seats fold flat so you can carry what eva or throw a mattres in the back and stay the night.

Performance,handeling with the advantage of carrying the family or your mates around.

For interstate buyers i can drop off to the nearest interstate depo of your choice for transport to your state.

I also have access to a hoist so any inspection welcome

Not a cent to spend except rego & comes with a current qld safety cert

Price $23,500 (pls not interested in swaps)

Located in Brisbane near CBD

0414-729-004

post-70521-0-70965100-1300272384_thumb.jpg

post-70521-0-04673300-1300272408_thumb.jpg

post-70521-0-27239300-1300272469_thumb.jpg

post-70521-0-69938100-1300272526_thumb.jpg

post-70521-0-75219600-1300272665_thumb.jpg

post-70521-0-70097200-1300272754_thumb.jpg

post-70521-0-44031600-1300272896_thumb.jpg

post-70521-0-28521900-1300272942_thumb.jpg

post-70521-0-89099500-1300272963_thumb.jpg

post-70521-0-05953400-1300273061_thumb.jpg

post-70521-0-07725200-1300273123_thumb.jpg

post-70521-0-58294600-1300273197_thumb.jpg

post-70521-0-11565400-1300273225_thumb.jpg

post-70521-0-75920600-1300273391_thumb.jpg

post-70521-0-52118700-1300273603_thumb.jpg

Link to comment
https://www.sau.com.au/forums/topic/357670-stagea-autech-version-260-rs-1998/
Share on other sites

Great looking Stagea, will be up on the 1st April Goldcoast for a mates wedding...if not sold before then wouldnt mind taking a look at it?

No prob mate,my number is listed in the ad.

Now on carsales

Still available 0414-729-004

Mmmmmmm this could get rid of my practicality issues owning a GTR. I have something to think about Sir:)

Very Nice Example!!

Engine Bay Pics please and maybe a few more of the interior.

really impressive looking machine. you must work hard to keep a black car looking that good - i recognise a perfectionist at work!

best of luck with sale.

Cheers for the kind words!

glaze, call anytime it's got your name written all over it :thumbsup:

Oh, a few things i forgot to mention it has...

Apexi high flow cat

Nismo caster bars with brake deflectors

I also have the factory Autech bbs rims that were on it from new (for that original jdm look)...

0414-729-004

Very clean car, still have a soft spot for these even though mine gave me hell. Nice to see such a nice and well kept example.

GL with the sale hope it goes to somone who is going to look after it.

First stagea I've ever seen that looks hot in my opinion, fantastic looking car mate

Thanx for the kind words friction_point.

Had 2 serious offers allready they just waiting for cash to arrive........:rolleyes:

Please not interested in swaps, had so many offers to swap and even a caravan was mentioned

unless your caravan was filled with gold,the fridge was full of Makers Mark and Maranda Kerr was strapped naked to the bed with a smile on her face id be keen (pre baby look of course)

New hme wanted!

0414-729-004

saw this on carsales and my god! DO WANT! :yes: :yes: :yes: :yes:

Haha TYPEVU you can have,just deposit the agreed funds into my empty bank account and it's yours!!

Why do i still have this?

Ok ok,how about i drop the price 1k? now $22,500 maybee that will do it?

Price Dropper $22,500

post-70521-0-87698700-1303552073_thumb.jpg

Imagine this parked in your driveway?

Just think,when your out on the town and you had too many drinks and you get lucky.....Think of the money you will save by throwing a matress in the back and not having to pay for a hotel room...

A GTR you can comfortably sleep in :3some:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • You can use your VIN to look up the factory part number somewhere like amayama, and then look to order new if necessary. https://www.amayama.com/en/genuine-catalogs/nissan Depending on price you might want to rebuild instead. @GTSBoy I had an interesting insight into US market parts when the Titan rear calipers were sticking. New calipers were dirt cheap, about 20% more than a rebuild kit....they are just considered throw away maintenance items
    • Funny, but really not funny. Thank god (most) f the world has moved on since then
    • Lots of votes for driving onto a plank first; that is the quickest way I've found, 25mm is enough for my case but that will vary by car It also depends where you are going for. On the 32 I can get to the rear diff with my floor jack if I do that end first, and get it up on stands. Then I lift the front from either front tow hook as high as needed, also onto stands. Sometimes I need a small lift on the other tow hook to get it level enough If I do the front first I can't get to the rear diff because of the angle of the car Other options are getting to the front mount of the rear subframe from in front of the wheel (if only lifting one side, or just do both which is a bit of a pain compared to one lift from the diff), or also the gearbox cross member mount on the driver's side if you are  just trying to lift the driver's side. I This is the jack I use; it says 75mm clearance but of course that is only on the lower section so if you have to reach too far in like the diff you still get stuck. https://www.snapon-bluepoint.com.sg/category/Floor-Jacks/product/Floor-Jack,-2-Ton-Low-Profile
    • On the bright side, the weather will turn much nicer for working outside shortly....sounds like you might need to start on a neighbour's garden next
    • Ok so i will NEED to have this sensor anyway even with Nistune (or standalone ECU) https://justjap.com/products/genuine-nissan-boost-pressure-sensor-evap-control-system-fits-nissan-r34-skyline-c34-nm35-stagea-pnt30-x-trail-rb25det-vq25det-sr20vet?currency=AUD&srsltid=AfmBOoqfxX48bW9bEwH62orcNhtBfp7ekAL0C9Ca89ySFGUiBzXfXeze Is this the correct one? And this is only thing i need? No other "things" connected to the sensor or something? I do have the wiring.
×
×
  • Create New...