Jump to content
SAU Community

Recommended Posts

Hey guys I know this is going to be a hard one but I have changed the engine in my GTR the old one did a big end, Long story short the car has been sitting for two years.

I have also put on 600CC injectors and a Sard FPR when I prime the car fuel sits around 45 which I have been told this is good. When I go to crank the car I think... I can hear spark.

Now what I wanted to know was the fuel is a little stale like 2 years stale I have tried to syphon it out but the tank doesn't allow me too and I cant find a drop plug. So I thought I would try and use it to start the car. Could this be the issue for it not starting?

any info would be great

Link to comment
https://www.sau.com.au/forums/topic/358514-engine-not-starting/
Share on other sites

I think you can also take off the fuel line from the feed line to the injector rail (at any point in front of the pump) and let the pump prime

My fuel pump primes constantly if I hold my key just ever so slightly before start (not sure if yours would be the same being a 32) but this may be a good way to get the majority of the fuel out of the tank.

If its impossible to get all of it out then try adding some octane booster and some fresh fuel, but best bet would be to remove as much of the stale fuel as possible

As above, changing spark plugs would be a good idea to :)

stick your nose in the fuel filler hole and see if you can smell it. horrible stale fuel gets a real acetone type flavour to it.. think nail polish or vodka kind of smell. if theres nothing like that then the fuel itself wont be your problem, bad fuel might prevent your engine from running as nice as it would otherwise, but it'll seldom stop an engine from running altogether. but yeah what the other guys said about the injectors.. if you haven't had the ecu tuned to suit them then theres your problem right there.

come to think about it.. the fuel sitting in my r32's tank is over a year old now.. still runs good when i fire it up.

Wonder how long he cranks it for - I had an SR sitting around for ages once that had to be cranked for a good 20s before it would start. I've also had an RB25 sitting for about 2 years without starting, fresh fuel and plugs and it started almost on the first crank. <3 RB :)

sorry for the late reply, The car starts :D everything was fine even the fuel which was sitting for 2 years it started first crank.

I was a stuped person and put the fuel reg on the feed line of the fuel and not the return which I now have it correct and as soon as I fixed it bam start :D :D :D

But now I have a few leeks I need to sort out :( My hicas system is leeking at the drivers side sigh :( and my turbo feed and return for coolent and oil are leeking :( I have the worst luck when it comes to copper rings I f@rken hate them.

well there is my progress I took it for a quick burst after I set the reg to 45psi and let the nistune auto tune the car for now and it feels very strong.

Be careful with the nistune softwares autotune feature, Its not meant to be a precise tuning tool. Just to help get a car started from a completely blank fuel map.

You really should be making changes to the kconst and latency to suit the new injectors instead of making direct changes to the fuel map, which is what the autotune does.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • This car has run before on this z32 ecu can get the part number for you, I have tried with no AFM it didn’t change anything, I compression tested today 140-150 across all 6 cylinders, also set fuel pressure to 43psi. The only weird thing was cylinder 1 plug was black and fouled other 5 cylinders were just wet with fuel. Spun cas by hand and confirmed injectors are clicking 
    • Since you came here to ask for help, have you thought about answering our questions, that might help us lead you to why it was skipping, or have you given up on getting advice?
    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
×
×
  • Create New...