Jump to content
SAU Community

Recommended Posts

Hey guys I know this is going to be a hard one but I have changed the engine in my GTR the old one did a big end, Long story short the car has been sitting for two years.

I have also put on 600CC injectors and a Sard FPR when I prime the car fuel sits around 45 which I have been told this is good. When I go to crank the car I think... I can hear spark.

Now what I wanted to know was the fuel is a little stale like 2 years stale I have tried to syphon it out but the tank doesn't allow me too and I cant find a drop plug. So I thought I would try and use it to start the car. Could this be the issue for it not starting?

any info would be great

Link to comment
https://www.sau.com.au/forums/topic/358514-engine-not-starting/
Share on other sites

I think you can also take off the fuel line from the feed line to the injector rail (at any point in front of the pump) and let the pump prime

My fuel pump primes constantly if I hold my key just ever so slightly before start (not sure if yours would be the same being a 32) but this may be a good way to get the majority of the fuel out of the tank.

If its impossible to get all of it out then try adding some octane booster and some fresh fuel, but best bet would be to remove as much of the stale fuel as possible

As above, changing spark plugs would be a good idea to :)

stick your nose in the fuel filler hole and see if you can smell it. horrible stale fuel gets a real acetone type flavour to it.. think nail polish or vodka kind of smell. if theres nothing like that then the fuel itself wont be your problem, bad fuel might prevent your engine from running as nice as it would otherwise, but it'll seldom stop an engine from running altogether. but yeah what the other guys said about the injectors.. if you haven't had the ecu tuned to suit them then theres your problem right there.

come to think about it.. the fuel sitting in my r32's tank is over a year old now.. still runs good when i fire it up.

Wonder how long he cranks it for - I had an SR sitting around for ages once that had to be cranked for a good 20s before it would start. I've also had an RB25 sitting for about 2 years without starting, fresh fuel and plugs and it started almost on the first crank. <3 RB :)

sorry for the late reply, The car starts :D everything was fine even the fuel which was sitting for 2 years it started first crank.

I was a stuped person and put the fuel reg on the feed line of the fuel and not the return which I now have it correct and as soon as I fixed it bam start :D :D :D

But now I have a few leeks I need to sort out :( My hicas system is leeking at the drivers side sigh :( and my turbo feed and return for coolent and oil are leeking :( I have the worst luck when it comes to copper rings I f@rken hate them.

well there is my progress I took it for a quick burst after I set the reg to 45psi and let the nistune auto tune the car for now and it feels very strong.

Be careful with the nistune softwares autotune feature, Its not meant to be a precise tuning tool. Just to help get a car started from a completely blank fuel map.

You really should be making changes to the kconst and latency to suit the new injectors instead of making direct changes to the fuel map, which is what the autotune does.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Hi Guys, Does anyone know any aftermarket part numbers for a starter motor to suit the VQ25DET? I can find lots of alternative part number for the VQ35DE, which I assume would fit, but there is a lot of conflicting information out there. Thanks..
    • I don't understand how this hasn't boiled down to - Upgrade the turbo when you have everything required. ECU, injectors, fuel pump, turbo, etc. Do it all at once.  If you don't have everything required, just enjoy the car as it is and keep saving up your pennies. 
    • Sounds like you've got an interesting adventure ahead here with local support if you have trouble! My guess is that, unboosted, you will be OK with a small upgrade like -9. What will happen is that once the stock ECU sees more airflow than it expects it will add a heap of fuel and pull a heap of timing to be safe because it can't understand how it could get that much air without there being an issue. You will see clouds of black smoke and it won't pull hard through the midrange and top end. So, overall it will be a bit frustrating but should be OK. If you are still nervous set the base timing back 2o through the CAS, but it will be even more sluggish everywhere. As said above through...this is not my guarantee your engine won't be blown into a million pieces, leaving you looking for very hard to find parts A better idea is get a computer with logging ASAP, wire in a wide band O2 sensor and a use remote tuner. I've done multiple cars this way and while it is not as good as a specific tune on a dyno they can get it 90% right. I'd suggest if you can afford an R33 GTR these days you can afford an ECU and tune. And if you can't afford that you sure won't be able to afford the rebuild if it goes bad in the meantime,.  
    • Yeah it would be nice if someone took the time to put that sort of information together, but there are a lot of variations in looms. I think you are making this way hard for yourself if you just want to get it running....sourcing an SR20 with the right wiring will be a billion times easier than matching the RB loom to an S15 chassis. If you do end up going this way, you just need to trace every wire in the loom with a multimeter, 95% of them will go to a location you can confirm at the ECU.....and then post it up for the next person who needs it  
    • Just top it up with water, and keep a general idea of how much you added. It is normal for water to be pushed into and pulled out of the reservoir through the cap, and it should not be more than half full or it will be likely to overflow when hot. Any decent mechanic can do a pressure test of the cooling system to confirm if you have a leak. Keep in mind if it is only leaking a little and when hot it may well evaporate before you see it hit the ground
×
×
  • Create New...