Jump to content
SAU Community

Recommended Posts

Thought id share my project for both sharibg experience and gaining some.

I have a s1 4 door 33 that started life as an automatic 2.5t. It was converted to manual and imported in 2000. Since then whilst in the hands of the previous owner it snapped a rod and an epic 30det was built for the car. After several years of bad luck and skids the previous owner decided to part it out, i brought the rolling shell minus box, engine and radiator.

I have a s3 manual gx 31 that is my daily and shortly to be my donor car...

Next week im putting the rb30 box and engine into the r33... As a strictly budjet project.

Ill be posting up some pics as i go as well as sharing pointers about.interchangability that i come across duribg this rare and retarded conversion... With 4.36 diff gears however im sure it will be interesting.

Link to comment
https://www.sau.com.au/forums/topic/359101-the-4-door-gts25t-with-an-rb30e/
Share on other sites

aha , it was you that bought it! , nice :) , are you planning on rego? might want to check with authorities before putting the rb30e+t? in to make sure it can be done . A friend of mine tried putting an older motor in a car he was building and found he couldn't get it passed for rego ( just a heads up :) )

Technically patrols came with rb30s untill slightly after the r33 was made... So it should be ok on paper... Its currently regoed with a 25det. I dont plan on changing it to be honest. If push came to shove it could be engineered without a problem. I had an engineer approve a 95 vs commodore with an rb25det s1 engine from an earlier 33.

Conversion starts on sunday but ill put up some pics soon.

At this stage i dont think ill turbocharge however ive been dreaming of supercharging, response and torque is the aim here but so is keeping to a very low budget. Have to see if it spins the 245`s on the back lol.

Ahh yep , didn't know it was still rego'd , all sweet then! :ph34r: . rb30 will love 4.3 diff gears and 245s! , i doubt you'll need a supercharger for response . I was gunna buy this car myself but couldn't find anywhere to put it (when i did it was too late :P ) . what you doing with the leftover bits of r31?

Ahh yep , didn't know it was still rego'd , all sweet then! :ph34r: . rb30 will love 4.3 diff gears and 245s! , i doubt you'll need a supercharger for response . I was gunna buy this car myself but couldn't find anywhere to put it (when i did it was too late :P ) . what you doing with the leftover bits of r31?

the left overs are being given to Phil Parnell for payment, hes the one doing the conversion for me

conversion under way:

exhaust, im please to say, lined up perfectly

gearbox cross member was not interchangeable

tail shaft was not interchangeable

r31 radiator does not fit, its too tall.

all ancillaries bolted up, inc air con.

wiring yet to be done

Ha ha ha... nice one.

Throw a lumpy cam and some more compression at it (along with the right exhaust) and get a really unique sound for a 33.

Good luck

Justin

Edited by XRATED
  • 2 weeks later...

Updated: r33 n/a tailshaft fitted, so did the standard r33 gearbox crossmember. The wiring was litterally 4 wires at the ecu side using the whole r31 engine loom with the r33 relays. Ended up chopping off the r31 altenator plugs and using them on the r33 body loom.

I have not hooked up the speedo or tacho yet but i have a jaycar speedo corrector mk2 that im hoping will work to correct the change in diff ratio.

Ill post up some vids and pics over the easter break

update: speedo worked with the speed correcter, massive 40% difference due to gearing! lol simply used 12v+ from r33 gearbox loom, made an earth and then ran the signal wire to the cabin to the adjuster and then straight to the back of the dash. FYI, for those using a Jay car speed correcter MK. 2 with an r33 you need to use the 8.2v JP1 setting and then use the AC JP5 setting... should work a treat!tacho cannot be driven by the stock tacho output from the r31 ecu, i will most likely piggy back it off the CAS or i will make some kind of relay style circuit to convert the signal to run the tacho

post-33471-0-25889900-1303296121_thumb.jpg

post-33471-0-73908800-1303296137_thumb.jpg

post-33471-0-30323100-1303296155_thumb.jpg

post-33471-0-35966700-1303296172_thumb.jpg

post-33471-0-37836300-1303296189_thumb.jpg

post-33471-0-79939700-1303296206_thumb.jpg

post-33471-0-14174900-1303296223_thumb.jpg

post-33471-0-60202000-1303296240_thumb.jpg

post-33471-0-01755400-1303296256_thumb.jpg

post-33471-0-30132900-1303296272_thumb.jpg

Im happy with how it performs. With the short gearing its nice and zippy. Feels very flat but as soon as you stomp it the powers there. Took down my mates auto s-vz no worries. Im thinking of keeping it na but tuning it to push the peak torque up the revs a bit just to make it a bit more powerful. First thing ill be doing. Besides a general tiday up and maintenance is a nistune ecu and some dyno time.

Before you get it tuned bang a cam and extractors in it.... One of my r31's many many many years ago, we threw a cam and chip (allready had extractors) at her and she really came alive.

I recently saw a shot on here somwhere of a rb25de manifold with twin tb's.. Similar to the 5lt walkinshaw manifold. There may be something in that too.. I'd be tempted to go two 50mm vg30 tb's. Or even try adapting a gtr intake set up to the 30??? Very unique either way.

post-22624-0-02779700-1303451703_thumb.jpg

You comming to the track day?

Cheers

Justin

Edited by XRATED

that looks a whole lot like Skitr31's engine bay! 150rwkw running an rb25det tune... noice

at the moment cash is tight so i wont be coming to the track day unfortunately.

im unsure what way to go yet, boosted, n/a 30e head or n/a 25de head... either way the car needs a tidy up before i start blowing wads of cash on making it go fast!

30e+t , if your aim is under 300rwk , nice and simple (and cheaper )

That's what I said at the track day... today.

Nice simple precision billet 5557 with wastegate and manifold adapter. Nistune, VL-T injectors etc...

J.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For these last 7 years of ownership, I've always had to use a small scissor jack under one of the front tow hooks to raise the front just enough so my low-profile jack fits under to reach my subframe jack point. I'm beginning to get annoyed of always having to do this. Are there any lower low-profile jacks that fit under the gtr lip on a dropped car?
    • Seat of the pants assessment of the new intake: The car is way less "doughy" when hitting the loud pedal, especially off idle when stopped or in traffic, I did use a cheapo lazer thermal thingo to measure the temp around where the pod filter got its air, it was between 55 - 60°C, in saying this the car was shut off and not moving, so the OEM intake pipe was not supplying any fresh air to where the pod was when the car was at least moving A weird bonus was induction noise on the throttle in the cabin increased a bit,  I was worried that I was actually going to lose some of that induction noise I love so much, outside though, when I got the daughter to do a WOT drive by pass for me, the induction noise has increased alot when on the throttle, not quite ITB doort, but well up there I'm extremely happy with the results and have been exploring the country roads in the region  As for house mods: 1.New front fence is up and is awesome, it really upgraded how the joint looks from the street, and the added security is nice 2. Electricians have replace some interior lights, and with more lighting in the garage, a few new motion detecting lights out the front above the garage, front room, and at the front door, which I have already found heaps helpful coming and going, also now has fancy pants CCTV all round the house The only hold point for power though is the solar and batteries due to supply issues, although this will happen over the next few weeks 3. I have done a heap of landscaping out the front and I'm almost ready to do a new small retaining wall with some nice blocks to replace the brick and cemented in rocks around the raised garden beds cemented in river stone "was the fashion at the time" the house was built. I currently have a pallet of retaining wall blocks and 2 bulka bags of 20mm blue metal to replace the wood chip that is in the raised garden beds around the house 4. I now have 3 big raised garden beds for out the back to grow some vegetables, about 70cm high, 200cm long and 100cm wide 5. My 2 compost bins are already pretty full with brown, green and kitchen waste from the landscaping I'vedone so far, but they will probably take a few months to break down, so anything else that gets chopped, trimmed, and kitchen waste will just start filling the base of the raised garden beds to about 30cm before I start throwing 40cm of good compost, and stuff, for the vegetables to grow in, I'll need a few ton of compost and soil, but the local supplier can sent me bulka bags of the stuff Basically the logs, wood chips and a few strategically placed rocks for drainage, will give the beds some good organic materials down low to break down over time, and they will hold moisture during the warmer months to save the water in my big arse water tank if we don't get alot of rain So, all in all, the car and house mods are going well, and I'm really enjoying being retired, I sleep in too 0700 and slowly plod around inside until I feel like actually doing anything, and only work in the yard for as long as want, which has actually been alot over the last few weeks,  although when you look at it, it seems that not a huge amount of work has been done,  until I look at the before I started the work pics Happy days and good times indeed 
    • hahaha yeah. Plan is to get side skirts and probably just rear pods. But going to do them one-by-one. I've got a set that I really like from RHDJapen, but that one isn't shipped to AU. So need to find someone who can get it for me
×
×
  • Create New...